kenny

CONTATTI:

Dipartimento di Ingegneria Civile ed Ambientale
University of Perugia, UdR INSTM
Strada di Pentima, 4 - 05100 Terni (TR) Italy
Tel. +39 0744 492939 | Fax +39 0744 492950

Email: Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.

Jose Maria KENNY

Curriculum

Teaching

Short Bio

Prof. José M. Kenny is Full Professor of Materials Science and Technology and Director of the Materials Science and Technology Centre of the University of Perugia in Italy. He is also the Director of the European Centre for Nanostructured Polymers with headquarters in Florence (Italy) and operative locations in Italy (Terni, Alessandria), France (Lyon) and Spain (Madrid). He has also been Research Professor and Vice Director at the Institute of Polymer Science and Technology of CSIC in Madrid (Spain) where he continues to direct a research group on nanostructures polymers and nanocomposites. Prof. Kenny graduated in Chemistry at the University of Buenos Aires (Argentina) and obtained his PhD at the University of the South (Bahia Blanca, Argentina). After 30 years of academic activities, J.M. Kenny has authored more than 450 indexed scientific publications (h=45) on the processing of polymers, composites and nanocomposite materials, and has coordinated numerous Italian, Spanish, European and international research and education projects in science and technology of polymers, composites and nanocomposites. He has been visiting professor at several European and American Universities, has been President of SAMPE EUROPE in 2001-2002 and is currently Past President, Trustee and Fellow of the European Society for Advanced Materials and Process Engineering (SAMPE). In 2008-2013 Prof. Kenny coordinated the European Network of Excellence on Nanostructured Polymers and Nanocomposites; in 2011 he received the SAMPE Fellow Award, in 2012 he received the RAICES Award from the Ministry of Research and Innovation of Argentina, and in 2014 he has been awarded the Mega-Grant of the Russian Federation for the Theoretical and Experimental Analysis of Thermoplastic Polymer Composites and Nanocomposites.

Temi di ricerca

  1. Materiali "green" e ri-valorizzazione di scarti agro-alimentari e forestali
  2. Biomateriali e Ingegneria tissutale
  3. Materiali per l’aerospazio e le alte temperature
  4. Materiali funzionali

Web profiles

Linkedin

Scopus

Research Gate

Lista Pubblicazioni

  1. Gallottini,C., Barraco, G., Pagano, S., De Carolis, C., Dolci, A., Chieruzzi, M., Eramo, S. Scanning electron microscopic analysis of the efficacy of acid etching on cat enamel (2014), Micro & Nano Letters, in press.
  2. Valentini, L., Bolognini, A., Alvino, A., Bittolo Bon, S., Martin-Gallego, M., Lopez-Manchado, M.A. Pyroshock testing on graphene based EPDM nanocomposites (2014), Composites Part B: Engineering, 60, pp. 479-484.
  3. Valentini, L., Fabbri, P., Messori, M., Degli Esposti, M., Bittolo Bon, S. Multilayer films composed of conductive poly(3-hydroxybutyrate)/carbon nanotubes bionanocomposites and a photoresponsive conducting polymer (2014), Journal of Polymer Science, Part B: Polymer Physics, . Article in Press.
  4. Natali, M., Koo, J.H., Allcorn, E., Ezekoye, O.A. An in-situ ablation recession sensor for carbon/carbon ablatives based on commercial ultra-miniature thermocouples (2014), Sensors and Actuators, B: Chemical, 196, pp. 46-56.
  5. Cacciotti, I., Fortunati, E., Puglia, D., Kenny, J.M., Nanni, F. Effect of silver nanoparticles and cellulose nanocrystals on electrospun poly(lactic) acid mats: Morphology, thermal properties and mechanical behavior (2014), Carbohydrate Polymers, 103 (1), pp. 22-31.
  6. Bonilla, J., Fortunati, E., Atarés, L., Chiralt, A., Kenny, J.M. Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films (2014), Food Hydrocolloids, 35, pp. 463-470.
  7. Navarro-Baena, I., Marcos-Fernández, A., Fernández-Torres, A., Kenny, J.M., Peponi, L. Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: Effect of the molecular weight on their crystallisation and mechanical properties (2014), RSC Advances, 4 (17), pp. 8510-8524.
  8. Valentini, L., Bittolo Bon, S., Fortunati, E., Kenny, J.M. Preparation of transparent and conductive cellulose nanocrystals/graphene nanoplatelets films (2014), Journal of Materials Science, 49 (3), pp. 1009-1013.
  9. Chieruzzi, M., Rallini, M., Pagano, S., Eramo, S., D'Errico, P., Torre, L., Kenny, J.M. Mechanical effect of static loading on endodontically treated teeth restored with fiber-reinforced posts (2014), Journal of Biomedical Materials Research - Part B Applied Biomaterials, 102 (2), pp. 384-394.
  10. Mattioli, S., Martino, S., D'Angelo, F., Emiliani, C., Kenny, J.M., Armentano, I. Nanostructured polystyrene films engineered by plasma processes: Surface characterization and stem cell interaction (2014), Journal of Applied Polymer Science, . Article in Press.
  11. Puglia, D., Fortunati, E., D'Amico, D.A., Manfredi, L.B., Cyras, V.P., Kenny, J.M. Influence of organically modified clays on the properties and disintegrability in compost of solution cast poly(3-hydroxybutyrate) films (2014), Polymer Degradation and Stability, 99 (1), pp. 127-135.
  12. Rescignano, N., Fortunati, E., Montesano, S., Emiliani, C., Kenny, J.M., Martino, S., Armentano, I. PVA bio-nanocomposites: A new take-off using cellulose nanocrystals and PLGA nanoparticles (2014), Carbohydrate Polymers, 99, pp. 47-58. Cited 1 time.
  13. Fortunati, E., Rinaldi, S., Peltzer, M., Bloise, N., Visai, L., Armentano, I., Jiménez, A., Latterini, L., Kenny, J.M. Nano-biocomposite films with modified cellulose nanocrystals and synthesized silver nanoparticles (2014), Carbohydrate Polymers, 101 (1), pp. 1122-1133.
  14. Fortunati, E. ANTIBACTERIAL ACTIVITY OF SILVER NANOPARTICLE BASED NANOCOMPOSITES (2013), In: Silver Nanoparticles: Synthesis, Uses and Health Concerns. Nova Science Publishers, Inc. Kenny J.M. and Armentano I.,  Editors. ISBN: 978-1-62808-402-3.
  15. Salajkova, M., Valentini, L., Zhou, Q., Berglund, L.A. Tough nanopaper structures based on cellulose nanofibers and carbon nanotubes (2013), Composites Science and Technology, 87, pp. 103-110.
  16. Fabbri, P., Valentini, L., Hum, J., Detsch, R., Boccaccini, A.R. 45S5 Bioglass®-derived scaffolds coated with organic-inorganic hybrids containing grapheme (2013), Materials Science and Engineering C, 33 (7), pp. 3592-3600.
  17. Natali, M., Koo, J.H., Allcorn, E., Ezekoye, O.A. In-situ ablation recession sensor based on ultra-miniature thermocouples - part a: 0.25 mm diameter thermocouples (2013), 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, .
  18. Yee, C., Ray, M., Tang, F., Wan, J., Tatuaca, R., Koo, J.H., Natali, M. In-situ ablation recession sensor based on ultra-miniature thermocouples - part b: 0.5 mm diameter thermocouples (2013), 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, .
  19. Bafekrpour, E., Yang, C., Natali, M., Fox, B. Functionally graded carbon nanofiber/phenolic nanocomposites and their mechanical properties (2013), Composites Part A: Applied Science and Manufacturing, 54, pp. 124-134.
  20. Koo, J.H., Natali, M., Tate, J., Allcorn, E. Polymer nanocomposites as ablative materials-a comprehensive review (2013), International Journal of Energetic Materials and Chemical Propulsion, 12 (2), pp. 119-162.
  21. Allcorn, E.K., Natali, M., Koo, J.H. Ablation performance and characterization of thermoplastic polyurethane elastomer nanocomposites (2013), Composites Part A: Applied Science and Manufacturing, 45, pp. 109-118. Article in Press. Cited 6 times.
  22. Torre, L., Puglia, D., Iannoni, A., Terenzi, A. Modeling of the chemorheological behavior of thermosetting polymer nanocomposites (2013), Modeling and Prediction of Polymer Nanocomposite Properties, pp. 255-287.
  23. Vijayan P, P., Puglia, D., Maria, H.J., Kenny, J.M., Thomas, S. Clay nanostructure and its localisation in an epoxy/liquid rubber blend (2013) RSC Advances, 3 (46), pp. 24634-24643.
  24. Fortunati, E., Puglia, D., Kenny, J.M., Minhaz-Ul Haque, Md., Pracella, M. Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal, rheological and biodegradation properties of poly(lactic acid) based systems(2013), Polymer Degradation and Stability, 98 (12), pp. 2742-2751.
  25. Valentini, L., Kenny, J.M., Alimenti, F., Roselli, L. Planar MOSFET devices on paper substrate using graphene oxide film as gate dielectric (2013), European Microwave Week 2013, EuMW 2013 - Conference Proceedings; EuMC 2013: 43rd European Microwave Conference, art. no. 06686576, pp. 5-8.
  26. Chieruzzi, M., Cerritelli, G.F., Miliozzi, A., Kenny, J.M. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage(2013), Nanoscale Research Letters, 8 (1), .
  27. Chiacchiarelli, L.M., Kenny, J.M., Torre, L. Kinetic and chemorheological modeling of the vitrification effect of highly reactive poly(urethane isocyanurate) thermosets (2013), Thermochimica Acta, 574, pp. 88-97.
  28. Alzari, V., Nuvoli, D., Sanna, R., Peponi, L., Piccinini, M., Bon, S.B., Marceddu, S., Valentini, L., Kenny, J.M., Mariani, A. Multistimuli-responsive hydrogels of poly(2-acrylamido-2-methyl-1- propanesulfonic acid) containing graphene (2013), Colloid and Polymer Science, 291 (11), pp. 2681-2687.
  29. Mattioli, S., Peltzer, M., Fortunati, E., Armentano, I., Jiménez, A., Kenny, J.M. Structure, gas-barrier properties and overall migration of poly(lactic acid) films coated with hydrogenated amorphous carbon layers(2013), Carbon, 63, pp. 274-282.
  30. Rinaldi, S., Fortunati, E., Taddei, M., Kenny, J.M., Armentano, I., Latterini, L. Integrated PLGA-Ag nanocomposite systems to control the degradation rate and antibacterial properties(2013), Journal of Applied Polymer Science, 130 (2), pp. 1185-1193.
  31. Valentini, L., Bittolo Bon, S., Kenny, J.M. Transfer writing of foldable graphene nanoplatelet patterns on paper substrates(2013), Materials Letters, 113, pp. 54-58.
  32. Natali, M., Rallini, M., Puglia, D., Kenny, J.M., Torre, L. An Armadillo-Like Flexible Thermal Protection System for Inflatable Decelerators: A Novel Paradigm (2013) Macromolecular Materials and Engineering, . Article in Press.
  33. Natali, M., Rallini, M., Puglia, D., Kenny, J.M., Torre, L. EPDM based heat shielding materials for Solid Rocket Motors: A comparative study of different fibrous reinforcements (2013), Polymer Degradation and Stability, . Article in Press.
  34. Casaban, L., Kirsten, M., Pegel, S., Carrasco, P.M., García, I., Stamm, M., Kenny, J.M. Shear induced orientation of phase segregated block copolymer/epoxy blends (2013), European Polymer Journal, 49 (10), pp. 3359-3365.
  35. Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M.A., Kenny, J.M. Multifunctional nanostructured PLA materials for packaging and tissue engineering (2013), Progress in Polymer Science, 38 (10-11), pp. 1720-1747.
  36. Sanna, R., Fortunati, E., Alzari, V., Nuvoli, D., Terenzi, A., Casula, M.F., Kenny, J.M., Mariani, A. Poly(N-vinylcaprolactam) nanocomposites containing nanocrystalline cellulose: A green approach to thermoresponsive hydrogels (2013), Cellulose, 20 (5), pp. 2393-2402.
  37. Martini, R.E., La Tegola, S., Terenzi, A., Kenny, J.M., Barbosa, S.E. Polyethylene-based nanocomposite films: Structure/properties relationship (2013), Polymer Engineering and Science, . Article in Press.
  38. Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., Foresti, M.L., Vazquez, A., Kenny, J.M. Okra (Abelmoschus esculentus) Fibre Based PLA Composites: Mechanical Behaviour and Biodegradation (2013), Journal of Polymers and the Environment, 21 (3), pp. 726-737.
  39. Sarasini, F., Puglia, D., Fortunati, E., Kenny, J.M., Santulli, C. Effect of Fiber Surface Treatments on Thermo-Mechanical Behavior of Poly(Lactic Acid)/Phormium Tenax Composites (2013), Journal of Polymers and the Environment, 21 (3), pp. 881-891.
  40. Rescignano, N., Tarpani, L., Tiribuzi, R., Montesano, S., Martino, S., Latterini, L., Kenny, J.M., Armentano, I. Protein encapsulation in biodegradable polymeric nanoparticles: Morphology, fluorescence behaviour and stem cell uptake(2013), Macromolecular Bioscience, 13 (9), pp. 1204-1212.
  41. Rallini, M., Natali, M., Kenny, J.M., Torre, L. Effect of boron carbide nanoparticles on the fire reaction and fire resistance of carbon fiber/epoxy composites(2013), Polymer (United Kingdom), 54 (19), pp. 5154-5165.
  42. Chiacchiarelli, L.M., Monsalve, L., Vázquez, A., Kenny, J.M., Torre, L. A polycaprolactone-based compatibilization treatment to improve dispersion and interphase structure of silica polyurethane composites (2013), Polymer Engineering and Science, . Article in Press.
  43. Valentini, L., Cardinali, M., Grkovic, M., Uskokovic, S.P., Alimenti, F., Roselli, L., Kenny, M.J. Flexible transistors exploiting P3HT on paper substrate and graphene oxide film as gate dielectric: Proof of concept (2013), Science of Advanced Materials, 5 (5), pp. 530-533.
  44. Petrucci, R., Santulli, C., Puglia, D., Sarasini, F., Torre, L., Kenny, J.M. Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion (2013), Materials and Design, 49, pp. 728-735.
  45. Chiacchiarelli, L.M., Puri, I., Puglia, D., Kenny, J.M., Torre, L. The relationship between nanosilica dispersion degree and the tensile properties of polyurethane nanocomposites (2013), Colloid and Polymer Science, 291 (12), pp. 2745-2753.
  46. George, S.M., Puglia, D., Kenny, J.M., Causin, V., Parameswaranpillai, J., Thomas, S. Morphological and mechanical characterization of nanostructured thermosets from epoxy and styrene-block-butadiene-block-styrene triblock copolymer (2013), Industrial and Engineering Chemistry Research, 52 (26), pp. 9121-9129.
  47. Valentini, L., Bon, S.B., Kenny, J.M. Liquid droplet excitation of freestanding poly(methyl methacrylate)/ graphene oxide films for mechanical energy harvesting (2013), Journal of Polymer Science, Part B: Polymer Physics, 51 (13), pp. 1028-1032.
  48. Bonilla, J., Fortunati, E., Vargas, M., Chiralt, A., Kenny, J.M. Effects of chitosan on the physicochemical and antimicrobial properties of PLA films (2013), Journal of Food Engineering, 119 (2), pp. 236-243.
  49. Fortunati, E., Luzi, F., Puglia, D., Terenzi, A., Vercellino, M., Visai, L., Santulli, C., Torre, L., Kenny, J.M. Ternary PVA nanocomposites containing cellulose nanocrystals from different sources and silver particles: Part II (2013), Carbohydrate Polymers, 97 (2), pp. 837-848.
  50. Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., Kenny, J.M. Cellulose nanocrystals extracted from okra fibers in PVA nanocomposites (2013), Journal of Applied Polymer Science, 128 (5), pp. 3220-3230.
  51. Valentini, L., Cardinali, M., Fortunati, E., Torre, L., Kenny, J.M. A novel method to prepare conductive nanocrystalline cellulose/graphene oxide composite films (2013), Materials Letters, 105, pp. 4-7.
  52. Valentini, L., Bittolo Bon, S., Kenny, J.M. Poly(methyl methacrylate)/graphene oxide layered films as generators for mechanical energy harvesting (2013), ACS Applied Materials and Interfaces, 5 (9), pp. 3770-3775. Chiacchiarelli, L.M., Rallini, M., Monti, M., Puglia, D., Kenny, J.M., Torre, L. The role of irreversible and reversible phenomena in the piezoresistive behavior of graphene epoxy nanocomposites applied to structural health monitoring (2013), Composites Science and Technology, 80, pp. 73-79.
  53. Fortunati, E., Peltzer, M., Armentano, I., Jiménez, A., Kenny, J.M. Combined effects of cellulose nanocrystals and silver nanoparticles on the barrier and migration properties of PLA nano-biocomposites (2013), Journal of Food Engineering, . Article in Press.
  54. Fortunati, E., Puglia, D., Luzi, F., Santulli, C., Kenny, J.M., Torre, L. Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: Part I (2013), Carbohydrate Polymers, 97 (2), pp. 825-836.
  55. Bitinis, N., Fortunati, E., Verdejo, R., Bras, J., Kenny, J.M., Torre, L., López-Manchado, M.A. Poly(lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites. Part II: Properties evaluation (2013), Carbohydrate Polymers, 96 (2), pp. 621-627.
  56. Brinchi, L., Cotana, F., Fortunati, E., Kenny, J.M. Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications (2013), Carbohydrate Polymers, 94 (1), pp. 154-169.
  57. Puglia, D., Monti, M., Santulli, C., Sarasini, F., De Rosa, I.M., Kenny, J.M. Effect of alkali and silane treatments on mechanical and thermal behavior of Phormium tenax fibers (2013), Fibers and Polymers, 14 (3), pp. 423-427.
  58. Peponi, L., Navarro-Baena, I., Sonseca, A., Gimenez, E., Marcos-Fernandez, A., Kenny, J.M. Synthesis and characterization of PCL-PLLA polyurethane with shape memory behavior (2013), European Polymer Journal, 49 (4), pp. 893-903.
  59. Rallini, M., Natali, M., Monti, M., Kenny, J.M., Torre, L. Effect of alumina nanoparticles on the thermal properties of carbon fibre-reinforced composites (2013), Fire and Materials, . Article in Press.
  60. Bitinis, N., Verdejo, R., Bras, J., Fortunati, E., Kenny, J.M., Torre, L., Lopez-Manchado, M.A. Poly(lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites Part I. Processing and morphology (2013), Carbohydrate Polymers, 96 (2), pp. 611-620.
  61. Vijayan, P.P., Puglia, D., Kenny, J.M., Thomas, S. Effect of organically modified nanoclay on the miscibility, rheology, morphology and properties of epoxy/carboxyl-terminated (butadiene-co- acrylonitrile) blend (2013), Soft Matter, 9 (10), pp. 2899-2911.
  62. Fortunati, E., Mattioli, S., Visai, L., Imbriani, M., Fierro, J.L.G., Kenny, J.M., Armentano, I. Combined effects of Ag nanoparticles and oxygen plasma treatment on PLGA morphological, chemical, and antibacterial properties (2013), Biomacromolecules, 14 (3), pp. 626-636.
  63. Armentano, I., Fortunati, E., Mattioli, S., Rescignano, N., Kenny, J.M. Biodegradable composite scaffolds: A strategy to modulate stem cell behaviour (2013), Recent Patents on Drug Delivery and Formulation, 7 (1), pp. 9-17.
  64. Chieruzzi, M., Miliozzi, A., Kenny, J.M. Effects of the nanoparticles on the thermal expansion and mechanical properties of unsaturated polyester/clay nanocomposites (2013), Composites Part A: Applied Science and Manufacturing, 45, pp. 44-48. Article in Press.
  65. Monti, M., Rallini, M., Puglia, D., Peponi, L., Torre, L., Kenny, J.M. Morphology and electrical properties of graphene-epoxy nanocomposites obtained by different solvent assisted processing methods (2013), Composites Part A: Applied Science and Manufacturing, 46 (1), pp. 166-172.
  66. Fortunati, E., Puglia, D., Monti, M., Peponi, L., Santulli, C., Kenny, J.M., Torre, L. Extraction of Cellulose Nanocrystals from Phormium tenax Fibres (2013), Journal of Polymers and the Environment, 21 (2), pp. 319-328.
  67. Fabbri, P., Valentini, L., Bittolo Bon, S., Foix, D., Pasquali, L., Montecchi, M., Sangermano, M. In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins misture (2012), Polymer (United Kingdom), 53 (26), pp. 6039-6044.
  68. Valentini, L., Bon, S.B. Plasma etching of polystyrene latex particles for the preparation of graphene oxide nanowalls (2012), Journal of the Serbian Chemical Society, 77 (12), pp. 1701-1707.
  69. Varela-Rizo, H., Bittolo-Bon, S., Rodriguez-Pastor, I., Valentini, L., Martin-Gullon, I. Processing and functionalization effect in CNF/PMMA nanocomposites (2012), Composites Part A: Applied Science and Manufacturing, 43 (4), pp. 711-721.
  70. Fabbri, P., Bassoli, E., Bon, S.B., Valentini, L. Preparation and characterization of poly (butylene terephthalate)/grapheme composites by in-situ polymerization of cyclic butylene terephthalate (2012), Polymer (United Kingdom), 53 (4), pp. 897-902.
  71. Koo, J.H., Natali, M., Allcorn, E., Tate, J. Advanced polymeric composites: An overview of thermal protection (2012), 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting, pp. 179-203.
  72. Koo, J.H., Natali, M., Tate, J., Mensah, T. A review of polymer nanocomposites as advanced thermal protection materials (2012), International SAMPE Technical Conference, 32 p.
  73. Romasanta, L.J., Leret, P., Casaban, L., Hernández, M., De La Rubia, M.A., Fernández, J.F., Kenny, J.M., Lopez-Manchado, M.A., Verdejo, R. Towards materials with enhanced electro-mechanical response: CaCu 3Ti4O12 polydimethylsiloxane composites(2012), Journal of Materials Chemistry, 22 (47), pp. 24705-24712.
  74. Chiacchiarelli, L.M., Puri, I., Puglia, D., Kenny, J.M., Torre, L. Cure kinetics of a highly reactive silica-polyurethane nano composite (2012), Thermochimica Acta, 549, pp. 172-178.
  75. Nuvoli, D., Alzari, V., Sanna, R., Scognamillo, S., Piccinini, M., Peponi, L., Kenny, J.M., Mariani, A. The production of concentrated dispersions of few-layer graphene by the direct exfoliation of graphite in organosilanes (2012), Nanoscale Research Letters, 7 (1), pp. 1-7.
  76. Armentano, I., Fortunati, E., Mattioli, S., Rescignano, N., Kenny, J.M. Tuning cell behavior in poly (lactic acid) based nanocomposite scaffolds (2012), Lactic Acid: Production, Properties and Health Effects, pp. 137-158.
  77. Lizundia, E., Sarasua, J.R., Armentano, I., Kenny, J.M. Crystallization behaviour in plla/mwcnt and plla/mwcnt-cooh nanocomposites (2012), Journal of Nanostructured Polymers and Nanocomposites, 8 (4), pp. 112-119.
  78. Chieruzzi, M., Pagano, S., Pennacchi, M., Lombardo, G., D'Errico, P., Kenny, J.M. Compressive and flexural behaviour of fibre reinforced endodontic posts (2012), Journal of Dentistry, 40 (11), pp. 968-978.
  79. George, S.M., Puglia, D., Kenny, J.M., Jyotishkumar, P., Thomas, S. Cure kinetics and thermal stability of micro and nanostructured thermosetting blends of epoxy resin and epoxidized styrene-block-butadiene- block-styrene triblock copolymer systems (2012), Polymer Engineering and Science, 52 (11), pp. 2336-2347.
  80. Valentini, L., Cardinali, M., Kenny, J.M., Prato, M., Monticelli, O. A photoresponsive hybrid nanomaterial based on graphene and polyhedral oligomeric silsesquioxanes (2012), European Journal of Inorganic Chemistry, (32), pp. 5282-5287.
  81. Valentini, L., Bon, S.B., Kenny, J.M. Emerging methods for producing graphene oxide composites in coatings with multifunctional properties (2012), Journal of Materials Chemistry, 22 (40), pp. 21355-21361.
  82. Fortunati, E., Armentano, I., Zhou, Q., Puglia, D., Terenzi, A., Berglund, L.A., Kenny, J.M. Microstructure and nonisothermal cold crystallization of PLA composites based on silver nanoparticles and nanocrystalline cellulose (2012), Polymer Degradation and Stability, 97 (10), pp. 2027-2036.
  83. Fortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., Kenny, J.M. Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites (2012), Carbohydrate Polymers, 90 (2), pp. 948-956.
  84. Sonseca, A., Peponi, L., Sahuquillo, O., Kenny, J.M., Giménez, E. Electrospinning of biodegradable polylactide/hydroxyapatite nanofibers: Study on the morphology, crystallinity structure and thermal stability (2012), Polymer Degradation and Stability, 97 (10), pp. 2052-2059.
  85. Peponi, L., Navarro-Baena, I., Báez, J.E., Kenny, J.M., Marcos-Fernández, A. Effect of the molecular weight on the crystallinity of PCL-b-PLLA di-block copolymers (2012), Polymer (United Kingdom), 53 (21), pp. 4561-4568.
  86. Fortunati, E., Puglia, D., Santulli, C., Sarasini, F., Kenny, J.M. Biodegradation of Phormium tenax/poly(lactic acid) composites (2012), Journal of Applied Polymer Science, 125 (SUPPL. 2), pp. E562-E572.
  87. Mattioli, S., Kenny, J.M., Armentano, I. Plasma surface modification of porous PLLA films: Analysis of surface properties and in vitro hydrolytic degradation (2012), Journal of Applied Polymer Science, 125 (SUPPL. 2), pp. E239-E247.
  88. Valentini, L., Cardinali, M., Kenny, J. Light induced change in conductivity of graphene oxide films patterned by metal masks (2012), Functional Materials Letters, 5 (3), art. no. 1250034, .
  89. Rallini, M., Monti, M., Natali, M., Puglia, D., Kenny, J.M., Torre, L. Graphene nanoplatelets as conductive fillers for strain sensing in epoxy nanocomposite (2012), International SAMPE Technical Conference, 3 p.
  90. Cardinali, M., Valentini, L., Kenny, J.M. Methods for the incorporation of chemically derived graphene sheets into organic media for the realization of conducting polymer nanocomposites (2012), International SAMPE Technical Conference, 8 p.
  91. Vijayan, P.P., Puglia, D., Jyotishkumar, P., Kenny, J.M., Thomas, S. Effect of nanoclay and carboxyl-terminated (butadiene-coacrylonitrile) (CTBN) rubber on the reaction induced phase separation and cure kinetics of an epoxy/cyclic anhydride system (2012), Journal of Materials Science, 47 (13), pp. 5241-5253.
  92. Lizundia, E., Sarasua, J.R., D'Angelo, F., Orlacchio, A., Martino, S., Kenny, J.M., Armentano, I. Biocompatible Poly(L-lactide)/MWCNT Nanocomposites: Morphological Characterization, Electrical Properties, and Stem Cell Interaction (2012), Macromolecular Bioscience, 12 (7), pp. 870-881.
  93. Cardinali, M., Valentini, L., Kenny, J.M., Mutlay, I. Graphene based composites prepared through exfoliation of graphite platelets in methyl methacrylate/poly(methyl methacrylate)(2012), Polymer International, 61 (7), pp. 1079-1083.
  94. Rescignano, N., Amelia, M., Credi, A., Kenny, J.M., Armentano, I. Morphological and thermal behavior of porous biopolymeric nanoparticles (2012), European Polymer Journal, 48 (7), pp. 1152-1159.
  95. Lamastra, F.R., Puglia, D., Monti, M., Vella, A., Peponi, L., Kenny, J.M., Nanni, F. Poly(e-caprolactone) reinforced with fibres of Poly(methyl methacrylate) loaded with multiwall carbon nanotubes or graphene nanoplatelets (2012), Chemical Engineering Journal, 195-196, pp. 140-148.
  96. Valentini, L., Bagnis, D., Cardinali, M., Kenny, J.M. Brush painting and DIP-coating techniques for organic solar cells (2012), Journal of Nanostructured Polymers and Nanocomposites, 8 (2), pp. 53-57.
  97. Armentano, I., Dottori, M., Fortunati, E., Villarreal, E., Chávez, J.L., Arzate, H., Kenny, J.M. Development of plga nanocomposite films and scaffolds for bone tissue engineering (2012), Journal of Nanostructured Polymers and Nanocomposites, 8 (1), pp. 12-20.
  98. Valentini, L., Bittolo Bon, S., Cardinali, M., Monticelli, O., Kenny, J.M. POSS vapor grafting on graphene oxide film (2012), Chemical Physics Letters, 537, pp. 84-87.
  99. Monti, M., Natali, M., Torre, L., Kenny, J.M. The alignment of single walled carbon nanotubes in an epoxy resin by applying a DC electric field (2012), Carbon, 50 (7), pp. 2453-2464.
  100. D'Angelo, F., Armentano, I., Cacciotti, I., Tiribuzi, R., Quattrocelli, M., Del Gaudio, C., Fortunati, E., Saino, E., Caraffa, A., Cerulli, G.G., Visai, L., Kenny, J.M., Sampaolesi, M., Bianco, A., Martino, S., Orlacchio, A. Tuning multi/pluri-potent stem cell fate by electrospun poly(l-lactic acid)-calcium-deficient hydroxyapatite nanocomposite mats (2012), Biomacromolecules, 13 (5), pp. 1350-1360.
  101. Visakh, P.M., Monti, M., Puglia, D., Rallini, M., Santulli, C., Sarasini, F., Thomas, S., Kenny, J.M. Mechanical and thermal properties of crab chitin reinforced carboxylated SBR composites (2012), Express Polymer Letters, 6 (5), pp. 396-409.
  102. Valentini, L., Bon, S.B., Monticelli, O., Kenny, J.M. Deposition of amino-functionalized polyhedral oligomeric silsesquioxanes on graphene oxide sheets immobilized onto an amino-silane modified silicon surface (2012), Journal of Materials Chemistry, 22 (13), pp. 6213-6217.
  103. Fortunati, E., Armentano, I., Iannoni, A., Barbale, M., Zaccheo, S., Scavone, M., Visai, L., Kenny, J.M. New multifunctional poly(lactide acid) composites: Mechanical, antibacterial, and degradation properties (2012), Journal of Applied Polymer Science, 124 (1), pp. 87-98.
  104. Peponi, L., Marcos-Fernández, A., Kenny, J.M. Nanostructured morphology of a random P(DLLA-co-CL) copolymer (2012), Nanoscale Research Letters, 7, art. no. 103, pp. 1-11.
  105. Ciapetti, G., Granchi, D., Devescovi, V., Baglio, S.R., Leonardi, E., Martini, D., Jurado, M.J., Olalde, B., Armentano, I., Kenny, J.M., Walboomers, F.X., Alava, J.I., Baldini, N. Enhancing osteoconduction of PLLA-based nanocomposite scaffolds for bone regeneration using different biomimetic signals to MSCs (2012), International Journal of Molecular Sciences, 13 (2), pp. 2439-2458.
  106. Fortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L.A., Kenny, J.M. Multifunctional bionanocomposite films of poly(lactic acid), cellulose nanocrystals and silver nanoparticles (2012), Carbohydrate Polymers, 87 (2), pp. 1596-1605.
  107. Martino, S., D'Angelo, F., Armentano, I., Kenny, J.M., Orlacchio, A. Stem cell-biomaterial interactions for regenerative medicine (2012), Biotechnology Advances, 30 (1), pp. 338-351.
  108. Natali, M., Monti, M., Puglia, D., Kenny, J.M., Torre, L. Ablative properties of carbon black and MWNT/phenolic composites: A comparative study (2012), Composites Part A: Applied Science and Manufacturing, 43 (1), pp. 174-182.
  109. Manca, P., Pilo, M.I., Casu, G., Gladiali, S., Sanna, G., Scanu, R., Spano, N., Zucca, A., Zanardi, C., Bagnis, D., Valentini, L. A new terpyridine tethered polythiophene: Electrosynthesis and characterization (2011), Journal of Polymer Science, Part A: Polymer Chemistry, 49 (16), pp. 3513-3523.
  110. Sangermano, M., Marchi, S., Valentini, L., Bon, S.B., Fabbri, P. Transparent and conductive graphene oxide/poly(ethylene glycol) diacrylate coatings obtained by photopolymerization (2011), Macromolecular Materials and Engineering, 296 (5), pp. 401-407.
  111. Nuvoli, D., Valentini, L., Alzari, V., Scognamillo, S., Bon, S.B., Piccinini, M., Illescas, J., Mariani, A. High concentration few-layer graphene sheets obtained by liquid phase exfoliation of graphite in ionic liquid (2011), Journal of Materials Chemistry, 21 (10), pp. 3428-3431.
  112. Valentini, L. Formation of unzipped carbon nanotubes by CF 4 plasma treatment (2011), Diamond and Related Materials, 20 (3), pp. 445-448.
  113. Allcorn, E., Robinson, S., Tschoepe, D., Koo, J.H., Natali, M. Development of an experimental apparatus for ablative nanocomposites testing (2011), 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011, .
  114. Allcorn, E.K., Natali, M., Koo, J.H. Ablation performance and characterization of thermoplastic polyurethane elastomer nanocomposites (2011), International SAMPE Technical Conference, 19 p.
  115. Rallini, M., Monti, M., Natali, M., Kenny, J.M., Torre, L. Carbon fibre/epoxy composites with improved fire resistance properties (2011), International SAMPE Technical Conference, 9 p.
  116. Fortunati, E., Latterini, L., Rinaldi, S., Kenny, J.M., Armentano, I. PLGA/Ag nanocomposites: In vitro degradation study and silver ion release (2011) Journal of Materials Science: Materials in Medicine, 22 (12), pp. 2735-2744.
  117. Fukushima, K., Tabuani, D., Dottori, M., Armentano, I., Kenny, J.M., Camino, G. Effect of temperature and nanoparticle type on hydrolytic degradation of poly(lactic acid) nanocomposites (2011), Polymer Degradation and Stability, 96 (12), pp. 2120-2129.
  118. Ludueña, L.N., Kenny, J.M., Vázquez, A., Alvarez, V.A. Effect of clay organic modifier on the final performance of PCL/clay nanocomposites (2011), Materials Science and Engineering A, 529 (1), pp. 215-223.
  119. Bitinis, N., Hernandez, M., Verdejo, R., Kenny, J.M., Lopez-Manchado, M.A. Recent advances in clay/polymer nanocomposites (2011), Advanced Materials, 23 (44), pp. 5229-5236.
  120. Monti, M., Natali, M., Petrucci, R., Kenny, J.M., Torre, L. Impact damage sensing in glass fiber reinforced composites based on carbon nanotubes by electrical resistance measurements (2011), Journal of Applied Polymer Science, 122 (4), pp. 2829-2836.
  121. Alzari, V., Nuvoli, D., Sanna, R., Scognamillo, S., Piccinini, M., Kenny, J.M., Malucelli, G., Mariani, A. In situ production of high filler content graphene-based polymer nanocomposites by reactive processing (2011), Journal of Materials Chemistry, 21 (41), pp. 16544-16549.
  122. Natali, M., Monti, M., Kenny, J.M., Torre, L. A nanostructured ablative bulk molding compound: Development and characterization (2011), Composites Part A: Applied Science and Manufacturing, 42 (9), pp. 1197-1204.
  123. Bittolo Bon, S., Valentini, L., Kenny, J.M. Electric field assisted thermal annealing reorganization of graphene oxide/polystyrene latex films (2011), Express Polymer Letters, 5 (9), pp. 819-824.
  124. De Rosa, I.M., Iannoni, A., Kenny, J.M., Puglia, D., Santulli, C., Sarasini, F., Terenzi, A. Poly(lactic acid)/Phormium tenax composites: Morphology and thermo-mechanical behavior (2011), Polymer Composites, 32 (9), pp. 1362-1368.
  125. Verdejo, R., Hernandez, M., Bitinis, N., Kenny, J.M., Lopez-Manchado, M.A. Vulcanization Characteristics and Curing Kinetic of Rubber-Organoclay Nanocomposites (2011), Rubber-Clay Nanocomposites: Science, Technology, and Applications, pp. 275-303.
  126. Casaban, L., Iannoni, A., Terenzi, A., Verdejo, R., Lopez-Manchado, M.A., Kenny, J.M. Development of functionalized graphene-PEEK matrix nanocomposites (2011), International SAMPE Technical Conference, 12 p.
  127. Cardinali, M., Valentini, L., Kenny, J.M. Anisotropic electrical transport properties of graphene nanoplatelets/pyrene composites by electric-field-assisted thermal annealing (2011), Journal of Physical Chemistry C, 115 (33), pp. 16652-16656.
  128. Monti, M., Puglia, D., Natali, M., Torre, L., Kenny, J.M. Effect of carbon nanofibers on the cure kinetics of unsaturated polyester resin: Thermal and chemorheological modeling (2011), Composites Science and Technology, 71 (12), pp. 1507-1516.
  129. Bon, S.B., Piccinini, M., Mariani, A., Kenny, J.M., Valentini, L. Wettability and switching of electrical conductivity in UV irradiated graphene oxide films (2011), Diamond and Related Materials, 20 (7), pp. 871-874.
  130. Natali, M., Monti, M., Kenny, J., Torre, L. Synthesis and thermal characterization of phenolic resin/silica nanocomposites prepared with high shear rate-mixing technique (2011), Journal of Applied Polymer Science, 120 (5), pp. 2632-2640.
  131. Fortunati, E., D'Angelo, F., Martino, S., Orlacchio, A., Kenny, J.M., Armentano, I. Carbon nanotubes and silver nanoparticles for multifunctional conductive biopolymer composites (2011), Carbon, 49 (7), pp. 2370-2379.
  132. Cardinali, M., Valentini, L., Fabbri, P., Kenny, J.M. Radiofrequency plasma assisted exfoliation and reduction of large-area graphene oxide platelets produced by a mechanical transfer process (2011), Chemical Physics Letters, 508 (4-6), pp. 285-288.
  133. Nanni, F., Del Gaudio, C., Armentano, I., Dottori, M., Bianco, A., Kenny, J.M., Gusmano, G. Dielectric properties at microwave frequencies of poly(e-caprolactone) /CNF films and electrospun mats (2011), Synthetic Metals, 161 (9-10), pp. 911-918.
  134. Bianco, A., Bozzo, B.M., Del Gaudio, C., Cacciotti, I., Armentano, I., Dottori, M., D'Angelo, F., Martino, S., Orlacchio, A., Kenny, J.M. Poly (L-lactic acid)/calcium-deficient nanohydroxyapatite electrospun mats for bone marrow stem cell cultures (2011), Journal of Bioactive and Compatible Polymers, 26 (3), pp. 225-241.
  135. Monti, M., Natali, M., Petrucci, R., Kenny, J.M., Torre, L. Carbon nanofibers for strain and impact damage sensing in glass fiber reinforced composites based on an unsaturated polyester resin (2011), Polymer Composites, 32 (5), pp. 766-775.
  136. Dottori, M., Armentano, I., Fortunati, E., Kenny, J.M. Production and properties of solvent-cast poly(e-caprolactone) composites with carbon nanostructures (2011), Journal of Applied Polymer Science, 119 (6), pp. 3544-3552.
  137. La Tegola, S., Terenzi, A., Martini, R., Barbosa, S., Torre, L., Kenny, J. Processing and final properties improvement of polyolefin-sepiolite and carbon nanofibre nanocomposites (2011), Macromolecular Symposia, 301 (1), pp. 128-135.
  138. Peponi, L., Tercjak, A., Martin, L., Mondragon, I., Kenny, J.M. Morphology-properties relationship on nanocomposite films based on poly(styrene-block-diene-block-styrene) copolymers and silver nanoparticles (2011), Express Polymer Letters, 5 (2), pp. 104-118.
  139. De Rosa, I.M., Kenny, J.M., Maniruzzaman, M., Moniruzzaman, M., Monti, M., Puglia, D., Santulli, C., Sarasini, F. Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres (2011), Composites Science and Technology, 71 (2), pp. 246-254.
  140. Nanni, F., Ruscito, G., Puglia, D., Terenzi, A., Kenny, J.M., Gusmano, G. Effect of carbon black nanoparticle intrinsic properties on the self-monitoring performance of glass fibre reinforced composite rods(2011), Composites Science and Technology, 71 (1), pp. 1-8.
  141. Armentano, I., Marinucci, L., Dottori, M., Balloni, S., Fortunati, E., Pennacchi, M., Becchetti, E., Locci, P., Kenny, J.M. Novel poly(L-lactide) PLLA/SWNTs nanocomposites for biomedical applications: Material characterization and biocompatibility evaluation (2011), Journal of Biomaterials Science, Polymer Edition, 22 (4-6), pp. 541-556.
  142. Alzari, V., Mariani, A., Monticelli, O., Valentini, L., Nuvoli, D., Piccinini, M., Scognamillo, S., Bon, S.B., Illescas, J. Stimuli-responsive polymer hydrogels containing partially exfoliated graphite (2010), Journal of Polymer Science, Part A: Polymer Chemistry, 48 (23), pp. 5375-5381.
  143. Valentini, L., Cardinali, M., Bon, S.B., Bagnis, D., Verdejo, R., Lopez-Manchado, M.A., Kenny, J.M. Erratum: Use of butylamine modified graphene sheets in polymer solar cells (Journal of Materials Chemistry (2010) 20 DOI: 10.1039/b919327h),(2010) Journal of Materials Chemistry, 20 (48), p. 10943.
  144. De Rosa, I.M., Kenny, J.M., Puglia, D., Santulli, C., Sarasini, F. Tensile behavior of New Zealand flax (Phormium tenax) fibers (2010), Journal of Reinforced Plastics and Composites, 29 (23), pp. 3450-3454.
  145. Corezzi, S., Fioretto, D., Santucci, G., Kenny, J.M. Modeling diffusion-control in the cure kinetics of epoxy-amine thermoset resins: An approach based on configurational entropy (2010), Polymer, 51 (24), pp. 5833-5845.
  146. Bittolo Bon, S., Valentini, L., Kenny, J.M., Peponi, L., Verdejo, R., Lopez-Manchado, M.A. Electrodeposition of transparent and conducting graphene/carbon nanotube thin films (2010), Physica Status Solidi (A) Applications and Materials Science, 207 (11), pp. 2461-2466.
  147. Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., Kenny, J.M. Biodegradable polymer matrix nanocomposites for tissue engineering: A review (2010) Polymer Degradation and Stability, 95 (11), pp. 2126-2146.
  148. Fortunati, E., Armentano, I., Iannoni, A., Kenny, J.M. Development and thermal behaviour of ternary PLA matrix composites (2010), Polymer Degradation and Stability, 95 (11), pp. 2200-2206.
  149. Armentano, I., Fortunati, E., Latterini, L., Rinaldi, S., Saino, E., Visai, L., Elisei, F., Kenny, J.M. Biodegradable PLGA matrix nanocomposite with silver nanoparticles: Material properties and bacteria activity (2010), Journal of Nanostructured Polymers and Nanocomposites, 6 (4), pp. 110-117.
  150. Joseph, S., Sreekumar, P.A., Kenny, J.M., Puglia, D., Thomas, S., Joseph, K. Oil palm microcomposites: Processing and mechanical behavior (2010), Polymer Engineering and Science, 50 (9), pp. 1853-1863.
  151. Peponi, L., Tercjak, A., Gutierrez, J., Cardinali, M., Mondragon, I., Valentini, L., Kenny, J.M. Mapping of carbon nanotubes in the polystyrene domains of a polystyrene-b-polyisoprene-b-polystyrene block copolymer matrix using electrostatic force microscopi (2010), Carbon, 48 (9), pp. 2590-2595.
  152. Monti, M., Terenzi, A., Natali, M., Gaztelumendi, I., Markaide, N., Kenny, J.M., Torre, L. Development of unsaturated polyester matrix - Carbon Nanofibers Nanocomposites with Improved Electrical Properties (2010), Journal of Applied Polymer Science, 117 (3), pp. 1658-1666.
  153. Joseph, S., Appukuttan, S.P., Kenny, J.M., Puglia, D., Thomas, S., Joseph, K. Dynamic mechanical properties of oil palm microfibril-reinforced natural rubber composites (2010), Journal of Applied Polymer Science, 117 (3), pp. 1298-1308.
  154. Monti, M., Natali, M., Kenny, J.M., Torre, L. MWNT-Doped epoxy matrix for detecting impact damages in fiber reinforced composites by electrical resistance measurements (2010), AIP Conference Proceedings, 1255, pp. 348-351.
  155. Peponi, L., Valentini, L., Kenny, J.M. Probing the sequestering of carbon nanotubes in the PS domains of SIS block copolymer matrix using electrostatic force microscopy (2010), AIP Conference Proceedings, 1255, pp. 382-385.
  156. Bittolo Bon, S., Valentini, L., Kenny, J.M. Preparation of extended alkylated graphene oxide conducting layers and effect study on the electrical properties of PEDOT:PSS polymer composites (2010), Chemical Physics Letters, 494 (4-6), pp. 264-268.
  157. D'Angelo, F., Armentano, I., Mattioli, S., Crispoltoni, L., Tiribuzi, R., Cerulli, G.G., Palmerini, C.A., Kenny, J.M., Martino, S., Orlacchio, A. Micropatterned hydrogenated amorphous carbon guides mesenchymal stem cells towards neuronal differentiation (2010), European Cells and Materials, 20, pp. 231-244.
  158. Bon, S.B., Valentini, L., Moustafa, R.M., Jradi, F.M., Kaafarani, B.R., Verdejo, R., Lopez-Manchado, M.A., Kenny, J.M. Morphology and photoelectrical properties of solution processable butylamine-modified graphene- and pyrene-based organic semiconductor (2010), Journal of Physical Chemistry C, 114 (25), pp. 11252-11257.
  159. Bianco, A., Del Gaudio, C., Baiguera, S., Armentano, I., Bertarelli, C., Dottori, M., Bultrini, G., Lucotti, A., Kenny, J.M., Folin, M. Microstructure and cytocompatibility of electrospun nanocomposites based on poly(e-caprolactone) and carbon nanostructures (2010), International Journal of Artificial Organs, 33 (5), pp. 271-282.
  160. Verdejo, R., Lopez-Manchado, M.A., Valentini, L., Kenny, J.M. Carbon Nanotube Reinforced Rubber Composites (2010), Rubber Nanocomposites: Preparation, Properties, and Applications, pp. 147-168.
  161. Natali, M., Kenny, J., Torre, L. Phenolic matrix nanocomposites based on commercial grade resols: Synthesis and characterization (2010), Composites Science and Technology, 70 (4), pp. 571-577.
  162. Torre, L., Chieruzzi, M., Kenny, J.M. Compatibilization and development of layered silicate nanocomposites based of unsatured polyester resin and customized intercalation agent (2010), Journal of Applied Polymer Science, 115 (6), pp. 3659-3666.
  163. Valentini, L., Cardinali, M., Kenny, J.M. Selective deposition of semiconducting single-walled carbon nanotubes onto amino-silane modified indium tin-oxide surface for the development of poly(3-hexylthiophene)/carbon-nanotube photovoltaic heterojunctions (2010), Carbon, 48 (3), pp. 861-867.
  164. Joseph, S., Sreekumar, P.A., Kenny, J.M., Puglia, D., Thomas, S., Joseph, K. Dynamic mechanical analysis of oil palm microfibril-reinforced acrylonitrile butadiene rubber composites (2010), Polymer Composites, 31 (2), pp. 236-244.
  165. Valentini, L., Cardinali, M., Bittolo Bon, S., Bagnis, D., Verdejo, R., Lopez-Manchado, M.A., Kenny, J.M. Use of butylamine modified graphene sheets in polymer solar cells (2010), Journal of Materials Chemistry, 20 (5), pp. 995-1000.
  166. De Rosa, I.M., Kenny, J.M., Puglia, D., Santulli, C., Sarasini, F. Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites (2010), Composites Science and Technology, 70 (1), pp. 116-122.
  167. Armentano, I., Ciapetti, G., Pennacchi, M., Dottori, M., Devescovi, V., Granchi, D., Baldini, N., Olalde, B., Jurado, M.J., Alava, J.I.M., Kenny, J.M. Role of PLLA plasma surface modification in the interaction with human marrow stromal cells (2009), Journal of Applied Polymer Science, 114 (6), pp. 3602-3611.
  168. Asdrubali, F., Baldinelli, G., D'Alessandro, F., Schiavoni, S., Kenny, J.M., Iannoni, A. Manufacturing process optimization of resilient materials made from recycled tyre granules (2009), 16th International Congress on Sound and Vibration 2009, ICSV 2009, 4, pp. 1985-1992.
  169. Peponi, L., Tercjak, A., Verdejo, R., Lopez-Manchado, M.A., Mondragon, I., Kenny, J.M. Confinement of functionalized graphene sheets by triblock copolymers (2009), Journal of Physical Chemistry C, 113 (42), pp. 17973-17978.
  170. Mastrandrea, F., Franceschini, G., Carnevali, V., Kenny, J.M., Iannoni, A. Development of MR fluid for running shoes with an active damping system (2009), IFMBE Proceedings, 24, pp. 153-154.
  171. Martino, S., D'Angelo, F., Armentano, I., Tiribuzi, R., Pennacchi, M., Dottori, M., Mattioli, S., Caraffa, A., Cerulli, G.G., Kenny, J.M., Orlacchio, A. Hydrogenated amorphous carbon nanopatterned film designs drive human bone marrow mesenchymal stem cell cytoskeleton architecture (2009), Tissue Engineering - Part A, 15 (10), pp. 3139-3149.
  172. Alzari, V., Monticelli, O., Nuvoli, D., Kenny, J.M., Mariani, A. Stimuli responsive hydrogels prepared by frontal polymerization (2009), Biomacromolecules, 10 (9), pp. 2672-2677. Cited 43 times.
  173. Armentano, I., Del Gaudio, C., Bianco, A., Dottori, M., Nanni, F., Fortunati, E., Kenny, J.M. Processing and properties of poly(e-caprolactone)/carbon nanofibre composite mats and films obtained by electrospinning and solvent casting (2009), Journal of Materials Science, 44 (18), pp. 4789-4795.
  174. Bianco, A., Di Federico, E., Moscatelli, I., Camaioni, A., Armentano, I., Campagnolo, L., Dottori, M., Kenny, J.M., Siracusa, G., Gusmano, G. Electrospun poly(e-caprolactone)/Ca-deficient hydroxyapatite nanohybrids: Microstructure, mechanical properties and cell response by murine embryonic stem cells (2009), Materials Science and Engineering C, 29 (6), pp. 2063-2071.
  175. Peponi, L., Valentini, L., Torre, L., Mondragon, I., Kenny, J.M. Surfactant assisted selective confinement of carbon nanotubes functionalized with octadecylamine in a poly(styrene-b-isoprene-b-styrene) block copolymer matrix (2009), Carbon, 47 (10), pp. 2474-2480.
  176. Bon, S.B., Valentini, L., Verdejo, R., Fierro, J.L.G., Peponi, L., Lopez-Manchado, M.A., Kenny, J.M. Plasma fluorination of chemically derived graphene sheets and subsequent modification with butylamine (2009), Chemistry of Materials, 21 (14), pp. 3433-3438.
  177. Vellis, P.D., Mikroyannidis, J.A., Bagnis, D., Valentini, L., Kenny, J.M. New anthracene-containing phenylene- or thienylene- vinylene copolymers: Synthesis, characterization, photophysics, and photovoltaics (2009), Journal of Applied Polymer Science, 113 (2), pp. 1173-1181.
  178. Valentini, L., Bagnis, D., Kenny, J.M. Nanofibrillar self-organization of regioregular poly(3-hexylthiophene) and [6,6]-phenyl C61-butyric acid methyl ester by dip-coating: A simple method to obtain efficient bulk heterojunction solar cells (2009), Nanotechnology, 20 (9), art. no. 095603, .
  179. Peponi, L., Tercjak, A., Torre, L., Mondragon, I., Kenny, J.M. Nanostructured physical gel of SBS block copolymer and Ag/DT/SBS nanocomposites (2009), Journal of Materials Science, 44 (5), pp. 1287-1293.
  180. Caria, G., Alzari, V., Monticelli, O., Nuvoli, D., Kenny, J.M., Mariani, A. Poly(N,N-dimethylacrylamide) hydrogels obtained by frontal polymerization (2009), Journal of Polymer Science, Part A: Polymer Chemistry, 47 (5), pp. 1422-1428.
  181. Peponi, L., Tercjak, A., Torre, L., Kenny, J.M., Mondragon, I. Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites (2009), Journal of Nanoscience and Nanotechnology, 9 (3), pp. 2128-2139.
  182. De Arcaya, P.A., Retegi, A., Arbelaiz, A., Kenny, J.M., Mondragon, I. Mechanical properties of natural fibers/polyamicles composites (2009), Polymer Composites, 30 (3), pp. 257-264.
  183. Lelli, G., Terenzi, A., Kenny, J.M., Torre, L. Modelling of the chemo-rheological behavior of thermosetting polymer nanocomposites (2009), Polymer Composites, 30 (1), pp. 1-12.
  184. Torre, L., Petrucci, R., Kenny, J.M. Development and characterisation of high performance, fibre reinforced nanocomposites (2008), International SAMPE Symposium and Exhibition (Proceedings), 52, 4 p.
  185. Armentano, I., Álvarez-Pérez, M.A., Carmona-Rodríguez, B., Gutiérrez-Ospina, I., Kenny, J.M., Arzate, H. Analysis of the biomineralization process on SWNT-COOH and F-SWNT films (2008), Materials Science and Engineering C, 28 (8), pp. 1522-1529.
  186. Armentano, I., Martino, S., D'Angelo, F., Pennacchi, M., Dottori, M., Tiribuzi, R., Orlacchio, A., Kenny, J.M. Effect of amorphous carbon nano-patterns on human bone marrow stromal stem cells (2008), 8th World Biomaterials Congress 2008, 1, p. 343.
  187. Armentano, I., Ciapetti, G., Pennacchi, M., Dottori, M., Pagani, S., Baldini, N., Olalde, B., Jurado, M.J., Alava, I., Kenny, J.M. PLLA plasma surface modifications for selective protein immobilization and improvement interactions with marrow stromal cells (2008), 8th World Biomaterials Congress 2008, 1, p. 344.
  188. Bianco, A., Di Federico, E., Moscatelli, I., Armentano, I., Cacciotti, I., Campagnolo, L., Siracusa, G., Camaioni, A., Dottori, M., Kenny, J.M., Gusmano, G. Bioresorbable nanohybrid membranes for bone regeneration by electrospinning (2008), 8th World Biomaterials Congress 2008, 3, p. 1425.
  189. Valentini, L., Bon, S.B., Kenny, J.M. Anisotropic electrical transport properties of aligned carbon nanotube/PMMA films obtained by electric-field-assisted thermal annealing (2008), Macromolecular Materials and Engineering, 293 (11), pp. 867-871.
  190. Manfredi, L.B., Puglia, D., Tomasucci, A., Kenny, J.M., Vázquez, A. Influence of clay modification on the properties of resol nanocomposites (2008), Macromolecular Materials and Engineering, 293 (11), pp. 878-886.
  191. Terenzi, A., Vedova, C., Lelli, G., Mijovic, J., Torre, L., Valentini, L., Kenny, J.M. Corrigendum to "Chemorheological behaviour of double-walled carbon nanotube-epoxy nanocomposites" (DOI:10.1016/j.compscitech.2008.01.005)(2008), Composites Science and Technology, 68 (14), p. 3064.
  192. Natali, M., Torre, L., Kenny, J.M. Phenolic matrix nanocomposites based on commercial grade resols synthesis, characterization and comparison with microcomposites (2008), AIP Conference Proceedings, 1042, pp. 190-192.
  193. Zelikman, E., Narkis, M., Siegmann, A., Valentini, L., Kenny, J.M. Polyaniline/multiwalled carbon nanotube systems: dispersion of CNT and CNT/PANI interaction (2008), Polymer Engineering and Science, 48 (10), pp. 1872-1877.
  194. Peponi, L., Torre, L., Kenny, J.M., Mondragon, I. Morphology and rheological behaviour of Ag-SBS nanocomposite gels(2008), AIP Conference Proceedings, 1042, pp. 272-275.
  195. Mariani, A., Alzari, V., Caria, G., Kenny, J.M., Monticelli, O., Murgia, M., Pojman, J.A., Russo, S. Frontal polymerization: A convenient alternative route to polymer materials (2008), American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, 49 (1), pp. 779-780.
  196. Valentini, L., Cardinali, M., Bagnis, D., Kenny, J.M. Solution casting of transparent and conductive carbon nanotubes/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) films under a magnetic field (2008), Carbon, 46 (11), pp. 1513-1517.
  197. Valentini, L., Marrocchi, A., Seri, M., Mengoni, F., Meloni, F., Taticchi, A., Kenny, J.M. [2.2]Paracyclophane-based molecular systems for the development of organic solar cells (2008), Thin Solid Films, 516 (20), pp. 7193-7198.
  198. Valentini, L., Bittolo Bon, S., Kenny, J.M. Realization of porous poly(methyl methacrylate) films filled with electrodeposited carbon nanotubes (2008), Nanotechnology, 19 (29), art. no. 295301, .
  199. Peponi, L., Tercjak, A., Gutierrez, J., Stadler, H., Torre, L., Kenny, J.M., Mondragon, I. Self-assembling of SBS block copolymers as templates for conductive silver nanocomposites (2008), Macromolecular Materials and Engineering, 293 (7), pp. 568-573.
  200. Valentini, L., Bagnis, D., Cagnoli, R., Meloni, F., Mucci, A., Schenetti, L., Kenny, J. Electrodeposition of carbon nanotube semi-transparent thin films: A facile route for preparing photoactive polymeric hybrid materials (2008), Diamond and Related Materials, 17 (7-10), pp. 1573-1576.
  201. Terenzi, A., Vedova, C., Lelli, G., Mijovic, J., Torre, L., Valentini, L., Kenny, J.M. Chemorheological behaviour of double-walled carbon nanotube-epoxy nanocomposites (2008), Composites Science and Technology, 68 (7-8), pp. 1862-1868.
  202. Armentano, I., Dottori, M., Puglia, D., Kenny, J.M. Effects of carbon nanotubes (CNTs) on the processing and in-vitro degradation of poly(dl-lactide-co-glycolide)/CNT films (2008), Journal of Materials Science: Materials in Medicine, 19 (6), pp. 2377-2387.
  203. Peponi, L., Tercjak, A., Torre, L., Kenny, J.M., Mondragon, I. Morphological analysis of self-assembled SIS block copolymer matrices containing silver nanoparticles (2008), Composites Science and Technology, 68 (7-8), pp. 1631-1636.
  204. Peponi, L., Tercjak, A., Torre, L., Kenny, J.M., Mondragon, I. Influence of the amount of silver nanoparticles in the properties of nanocomposites based on poly(styrene-b-isoprene-b-styrene) and poly(styrene-b-butadiene-b-styrene) block copolymer matrix (2008), Journal of Nanostructured Polymers and Nanocomposites, 4 (2), pp. 76-83.
  205. Peponi, L., Biagiotti, J., Torre, L., Kenny, J.M., Mondragòn, I. Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers (2008), Polymer Composites, 29 (3), pp. 313-320.
  206. Peponi, L., Biagiotti, J., Kenny, J.M., Mondragòn, I. Statistical analysis of the mechanical properties of natural fibers and their composite materials. II. Composite materials (2008), Polymer Composites, 29 (3), pp. 321-325.
  207. Puglia, D., Terenzi, A., Barbosa, S.E., Kenny, J.M. Polypropylene-natural fibre composites. Analysis of fibre structure modification during compounding and its influence on the final properties (2008), Composite Interfaces, 15 (2-3), pp. 111-129.
  208. Valentini, L., Puglia, D., Carniato, F., Boccaleri, E., Marchese, L., Kenny, J.M. Use of plasma fluorinated single-walled carbon nanotubes for the preparation of nanocomposites with epoxy matrix (2008), Composites Science and Technology, 68 (3-4), pp. 1008-1014.
  209. Valentini, L., Bagnis, D., Kenny, J.M. Organized fluidic assembly of single-walled carbon nanotubes onto fluorine-doped tin-oxide surface with modified wettability (2008), Carbon, 46 (2), pp. 372-375.
  210. Valentini, L., Taticchi, A., Marrocchi, A., Kenny, J.M. Patterning of [2.2]paracyclophane derivative modified single-walled carbon nanotubes through grid-assisted deposition (2008), Journal of Materials Chemistry, 18 (4), pp. 484-488.
  211. Valentini, L., Bagnis, D., Marrocchi, A., Seri, M., Taticchi, A., Kenny, J.M. Novel anthracene-core molecule for the development of efficient PCBM-based solar cells (2008), Chemistry of Materials, 20 (1), pp. 32-34.
  212. Cusani, R., Inzerilli, T., Valentini, L. Network monitoring and performance evaluation in a 3.5G network (2007), Computer Networks, 51 (15), pp. 4412-4420.
  213. Zangani, D., Robinson, M., Gibson, A.G., Torre, L., Holmberg, J.A. Numerical simulation of bending and failure behaviour of z-core sandwich panels (2007), Plastics, Rubber and Composites, 36 (9), pp. 389-395.
  214. Goiti, E., Salinas, M.M., Arias, G., Puglia, D., Kenny, J.M., Mijangos, C. Effect of magnetic nanoparticles on the thermal properties of some hydrogels (2007), Polymer Degradation and Stability, 92 (12), pp. 2198-2205.
  215. Valentini, L., Bon, S.B., Kenny, J.M. Electrodeposited carbon nanotubes as template for the preparation of semi-transparent conductive thin films by in situ polymerization of methyl methacrylate (2007), Carbon, 45 (13), pp. 2685-2691.
  216. Bian, Y., Pejanovic, S., Kenny, J., Mijovic, J. Dynamics of multifunctional polyhedral oligomeric silsesquioxane/ poly(propylene oxide) nanocomposites as studied by dielectric relaxation spectroscopy and dynamic mechanical spectroscopy (2007), Macromolecules, 40 (17), pp. 6239-6248.
  217. Stocchi, A., Bernal, C., Vazquez, A., Biagotti, J., Kenny, J. A silicone treatment compared to traditional natural fiber treatments: Effect on the mechanical and viscoelastic properties of jute-vinylester laminates (2007), Journal of Composite Materials, 41 (16), pp. 2005-2024.
  218. Mijovic, J., Ristic, S., Kenny, J. Dynamics of six generations of PAMAM dendrimers as studied by dielectric relaxation spectroscopy (2007), Macromolecules, 40 (14), pp. 5212-5221.
  219. Valentini, L., Mengoni, F., Kenny, J.M., Marrocchi, A., Taticchi, A. Self-assembly of photoresponsive [2.2]paracyclophane-derivative nanostripes on a conducting surface with modified wettability (2007), Small, 3 (7), pp. 1200-1203.
  220. Manfredi, L.B., Puglia, D., Kenny, J.M., Vázquez, A. Structure-properties relationship in resol/montmorillonite nanocomposites (2007), Journal of Applied Polymer Science, 104 (5), pp. 3082-3089.
  221. Mariani, A., Bidali, S., Caria, G., Monticelli, O., Russo, S., Kenny, J.M. Synthesis and characterization of epoxy resin-montmorillonite nanocomposites obtained by frontal polymerization (2007), Journal of Polymer Science, Part A: Polymer Chemistry, 45 (11), pp. 2204-2211.
  222. Frulloni, E., Kenny, J.M., Conti, P., Torre, L. Experimental study and finite element analysis of the elastic instability of composite lattice structures for aeronautic applications (2007), Composite Structures, 78 (4), pp. 519-528.
  223. Valentini, L., Mengoni, F., Mattiello, L., Kenny, J.M. Electrodeposition of polyfluorene on a carbon nanotube electrode (2007) Nanotechnology, 18 (11), art. no. 115702, .
  224. Pitarresi, G., Carruthers, J.J., Robinson, A.M., Torre, G., Kenny, J.M., Ingleton, S., Velecela, O., Found, M.S. A comparative evaluation of crashworthy composite sandwich structures (2007), Composite Structures, 78 (1), pp. 34-44.
  225. Valentini, L., Trentini, M., Mengoni, F., Alongi, J., Armentano, I., Ricco, L., Mariani, A., Kenny, J.M. Synthesis and photoelectrical properties of carbon nanotube-dendritic porphyrin light harvesting molecule systems (2007), Diamond and Related Materials, 16 (3), pp. 658-663.
  226. Terenzi, A., Kenny, J.M., Barbosa, S.E. Natural fiber suspensions in thermoplastic polymers. I. analysis of fiber damage during processing (2007), Journal of Applied Polymer Science, 103 (4), pp. 2501-2506.
  227. Fraga, A.N., Frullloni, E., De La Osa, O., Kenny, J.M., Vázquez, A. Relationship between water absorption and dielectric behavior of glass fiber reinforced unsaturated polyester resin (2007), Journal of Composite Materials, 41 (4), pp. 393-402.
  228. Morán, J., Alvarez, V., Petrucci, R., Kenny, J., Vazquez, A. Mechanical properties of polypropylene composites based on natural fibers subjected to multiple extrusion cycles (2007), Journal of Applied Polymer Science, 103 (1), pp. 228-237.
  229. Valentini, L., Puglia, D., Armentano, I., Kenny, J.M. Erratum/Addendum to 'Sidewall functionalization of single-walled carbon nanotubes through CF4 plasma treatment and subsequent reaction with aliphatic amines' [Chem. Phys. Lett. 403 (2005) 385-389] (DOI:10.1016/j.cplett.2005.01.042)(2006), Chemical Physics Letters, 429 (1-3), p. 341.
  230. Valentini, L., Macan, J., Armentano, I., Mengoni, F., Kenny, J.M. Modification of fluorinated single-walled carbon nanotubes with aminosilane molecules (2006) Carbon, 44 (11), pp. 2196-2201.
  231. Valentini, L., Mengoni, F., Taticchi, A., Marrocchi, A., Landi, S., Minuti, L., Kenny, J.M. Erratum: [2.2]Paracyclophanes incorporated within poly(3-butylthiophene): Synthesis and photoelectrical properties (New Journal of Chemistry (2006) 30, (939) DOI: 10.1039/b601535f) (2006), New Journal of Chemistry, 30 (8), p. 1.
  232. Valentini, L., Mengoni, F., Taticchi, A., Marrocchi, A., Landi, S., Minuti, L., Kenny, J.M. [2.2]Paracyclophanes incorporated within poly(3-butylthiophene): Synthesis and photoelectrical properties (2006), New Journal of Chemistry, 30 (6), pp. 939-943.
  233. Torre, L., Lelli, G., Kenny, J.M. Synthesis and characterization of sPS/montmorillonite nanocomposites (2006), Journal of Applied Polymer Science, 100 (6), pp. 4957-4963.
  234. Valentini, L., Mengoni, F., Taticchi, A., Marrocchi, A., Kenny, J.M. Surface patterning of linearly functionalized [2.2]paracyclophanes by voltage assisted dewetting (2006), Journal of Materials Chemistry, 16 (17), pp. 1622-1625.
  235. Valentini, L., Mengoni, F., Armentano, I., Kenny, J.M., Ricco, L., Alongi, J., Trentini, M., Russo, S., Mariani, A. Enhancement of photoelectrical properties in polymer nanocomposites containing modified single-walled carbon nanotubes by conducting dendrimer (2006), Journal of Applied Physics, 99 (11), art. no. 114305, .
  236. Fraga, A.N., Frullloni, E., De La Osa, O., Kenny, J.M., Vázquez, A. Relationship between water absorption and dielectric behaviour of natural fibre composite materials (2006), Polymer Testing, 25 (2), pp. 181-187
  237. Mijovic, J., Lee, H., Kenny, J., Mays, J. Dynamics in polymer-silicate nanocomposites as studied by dielectric relaxation spectroscopy and dynamic mechanical spectroscopy (2006), Macromolecules, 39 (6), pp. 2172-2182.
  238. Rodríguez, E., Alvarez, V.A., Moran, J., Moreno, S., Petrucci, R., Kenny, J.M., Vázquez, A. Mechanical properties evaluation of a recycled flax fiber-reinforced vinyl ester (2006), Journal of Composite Materials, 40 (3), pp. 245-256.
  239. Valentini, L., Armentano, I., Ricco, L., Alongi, J., Pennelli, G., Mariani, A., Russo, S., Kenny, J.M. Selective interaction of single-walled carbon nanotubes with conducting dendrimer (2006), Diamond and Related Materials, 15 (1), pp. 95-99.
  240. Alvarez, V., Iannoni, A., Kenny, J.M., Vázquez, A. Influence of twin-screw processing conditions on the mechanical properties of biocomposites (2005), Journal of Composite Materials, 39 (22), pp. 2023-2038.
  241. Frigione, M., Kenny, J.M. Effects of storage aging on the cure kinetics of bismaleimide prepregs (2005), Advances in Polymer Technology, 24 (4), pp. 253-265.
  242. Corezzi, S., Palmieri, L., Kenny, J.M., Fioretto, D. Clustering, glass transition and gelation in a reactive fluid (2005), Journal of Physics Condensed Matter, 17 (45), pp. S3557-S3563.
  243. Lozzi, L., Picozzi, S., Armentano, I., Valentini, L., Kenny, J.M., La Rosa, S., Coreno, M., De Simone, M., Delley, B., Santucci, S. Erratum: Soft-x-ray photoemission spectroscopy and ab initio studies on the adsorption of NO2 molecules on defective multiwalled carbon nanotubes (Journal of Chemical Physics (2005) 123 (034702)) (2005), Journal of Chemical Physics, 123 (17), art. no. 179901, .
  244. Ricco, L., Alongi, J., Valentini, L., Armentano, I., Mariani, A., Russo, S., Kenny, J.M. Preparation and characterization of a new nanocomposite system based on dendrimer/carbon nanotube pair (2005), Journal of Nanostructured Polymers and Nanocomposites, 1 (1), pp. 5-12.
  245. Lozzi, I., Picozzi, S., Armentano, L., Valentini, L., Kenny, J.M., La Rosa, S., Coreno, M., De Simone, M., Delley, B., Santucci, S. Soft-x-ray photoemission spectroscopy and ab initio studies on the adsorption of NO 2 molecules on defective multiwalled carbon nanotubes (2005), Journal of Chemical Physics, 123 (3), art. no. 034702, .
  246. Valentini, L., Kenny, J.M. Novel approaches to developing carbon nanotube based polymer composites: Fundamental studies and nanotech applications (2005), Polymer, 46 (17), pp. 6715-6718.
  247. Mercuri, F., Sgamellotti, A., Valentini, L., Armentano, I., Kenny, J.M. Vacancy-induced chemisorption of NO2 on carbon nanotubes: A combined theoretical and experimental study (2005), Journal of Physical Chemistry B, 109 (27), pp. 13175-13179.
  248. Valentini, L., Armentano, I., Mengoni, F., Puglia, D., Pennelli, G., Kenny, J.M. Chemical gating and photoconductivity of CF4 plasma-functionalized single-walled carbon nanotubes with adsorbed butylamine (2005), Journal of Applied Physics, 97 (11), art. no. 114320, .
  249. Frulloni, E., Salinas, M.M., Torre, L., Mariani, A., Kenny, J.M. Numerical modeling and experimental study of the frontal polymerization of the diglycidyl ether of bisphenol a/diethylenetriamine epoxy system (2005), Journal of Applied Polymer Science, 96 (5), pp. 1756-1766. Manchado, M.A.L., Valentini, L., Biagiotti, J., Kenny, J.M. Thermal and mechanical properties of single-walled carbon nanotubes-polypropylene composites prepared by melt processing (2005), Carbon, 43 (7), pp. 1499-1505.
  250. Aguilar, M., Alcaraz, J., Allaby, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Bene, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Carosi, G., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Cho, K., Choi, M.J., Choi, Y.Y., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cortina-Gil, E., Cristinziani, M., da Cunha, J.P., Dai, T.S., Delgado, C., Demirköz, B., Deus, J.D., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Henning, R., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, D.H., Kim, G.N., Kim, K.S., Kim, M.Y., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Lanciotti, E., Laurenti, G., Lebedev, A., Lechanoine-Leluc, C., Lee, M.W., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lubelsmeyer, K., Luckey, D., Lustermann, W., Mafia, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Monreal, B., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, H.B., Park, W.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Pohl, M., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Ro, S., Roeser, U., Rossin, C., Sagdeev, R., Santos, D., Sartorelli, G., Sbarra, C., Schael, S., Schultz von Dratzig, A., Schwering, G., Scolieri, G., Seo, E.S., Shin, J.W., Shoumilov, E., Shoutko, V., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Ting, S.C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vite, D., von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, J., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B., Zuccon, P. A study of cosmic ray secondaries induced by the Mir space station using AMS-01 (2005), Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 234 (3), pp. 321-332.
  251. Arbelaiz, A., Cantero, G., Fernández, B., Mondragon, I., Gañán, P., Kenny, J.M. Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties (2005), Polymer Composites, 26 (3), pp. 324-332.
  252. Rodríguez, E., Petrucci, R., Puglia, D., Kenny, J.M., Vázquez, A. Characterization of composites based on natural and glass fibers obtained by vacuum infusion (2005), Journal of Composite Materials, 39 (3), pp. 265-282.
  253. Valentini, L., Armentano, I., Kenny, J.M., Bidali, S., Mariani, A. Interaction of oxygen with nanocomposites made of n-type conducting polymers and carbon nanotubes: Role of charge transfer complex formation between nanotubes and poly(3-octylthiophene) (2005), Thin Solid Films, 476 (1), pp. 162-167.
  254. Valentini, L., Puglia, D., Armentano, I., Kenny, J.M. Sidewall functionalization of single-walled carbon nanotubes through CF4 plasma treatment and subsequent reaction with aliphatic amines (2005), Chemical Physics Letters, 403 (4-6), pp. 385-389.
  255. Corezzi, S., Fioretto, D., Kenny, J.M. Clustering and cooperative dynamics in a reactive system (2005), Physical Review Letters, 94 (6), art. no. 065702, .
  256. Causin, V., Marega, C., Marigo, A., Valentini, L., Kenny, J.M. Crystallization and melting behavior of poly(3-butylthiophene), poly(3-octylthiophene), and poly(3-dodecylthiophene) (2005), Macromolecules, 38 (2), pp. 409-415.
  257. Cabral, H., Cisneros, M., Kenny, J.M., Vázquez, A., Bernal, C.R. Structure-properties relationship of short jute fiber-reinforced polypropylene composites (2005) Journal of Composite Materials, 39 (1), pp. 51-65.
  258. Bregliozzi, G., Di Schino, A., Ahmed, S.I.-U., Kenny, J.M., Haefke, H. Cavitation wear behaviour of austenitic stainless steels with different grain sizes (2005), Wear, 258 (1-4 SPEC. ISS.), pp. 503-510. SOURCE: Scopus
  259. Valentini, L., Armentano, I., Kenny, J.M. Electrically switchable carbon nanotubes hydrophobic surfaces (2005), Diamond and Related Materials, 14 (1), pp. 121-124.
  260. Picozzi, S., Santucci, S., Lozzi, L., Valentini, L., Delley, B. Ozone adsorption on carbon nanotubes: The role of Stone-Wales defects (2004), Journal of Chemical Physics, 120 (15), pp. 7147-7152.
  261. Biagiotti, J., Puglia, D., Kenny, J.M. A review on natural fibre-based composites - Part I: Structure, processing and properties of vegetable fibres (2004), Journal of Natural Fibers, 1 (2), pp. 37-68.
  262. Biagiotti, J., Valentini, L., Kenny, J.M., López Manchado, M.A., Arroyo, M. Synthesis and characterization of composites based on TPOs reinforced with carbon nanotubes [Síntesis y caracterización de composites de TPOS reforzados con nanotubos de carbono] (2004), Boletin de la Sociedad Espanola de Ceramica y Vidrio, 43 (2), pp. 527-531.
  263. Cantalini, C., Valentini, L., Kenny, J.M., Lozzi, L., Santucci, S. Carbon Nanotubes gas sensors: Current status and future prospescts (2004), Proceedings of IEEE Sensors, 1, art. no. M4L-A.6, pp. 407-408.
  264. Puglia, D., Biagiotti, J., Kenny, J.M. A review on natural fibre-based composites - Part II: Application of natural reinforcements in composite materials for automotive industry (2004), Journal of Natural Fibers, 1 (3), pp. 23-65.
  265. Torre, L., Lelli, G., Kenny, J.M. Cure kinetics of epoxy/anhydride nanocomposite systems with added reactive flame retardants (2004), Journal of Applied Polymer Science, 94 (4), pp. 1676-1689.
  266. Bregliozzi, G., Ahmed, S.I.-U., Di Schino, A., Kenny, J.M., Haefke, H. Friction and wear behavior of austenitic stainless steel: Influence of atmospheric humidity, load range, and grain size (2004), Tribology Letters, 17 (4), pp. 697-704.
  267. Alvarez, V.A., Terenzi, A., Kenny, J.M., Vázquez, A. Melt rheological behavior of starch-based matrix composites reinforced with short sisal fibers (2004), Polymer Engineering and Science, 44 (10), pp. 1907-1914.
  268. Biagiotti, J., Puglia, D., Torre, L., Kenny, J.M., Arbelaiz, A., Cantero, G., Marieta, C., Llano-Ponte, R., Mondragon, I. A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites (2004), Polymer Composites, 25 (5), pp. 470-479.
  269. Cyras, V.P., Vallo, C., Kenny, J.M., Vázquez, A. Effect of chemical treatment on the mechanical properties of starch-based blends reinforced with sisal fibre (2004), Journal of Composite Materials, 38 (16), pp. 1387-1399.
  270. Valentini, L., Lozzi, L., Picozzi, S., Cantalini, C., Santucci, S., Kenny, J.M. Adsorption of oxidizing gases on multiwalled carbon nanotubes (2004), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 22 (4), pp. 1450-1454.
  271. Valentini, L., Bavastrello, V., Armentano, I., D'Angelo, F., Pennelli, G., Nicolini, C., Kenny, J.M. Synthesis and electrical properties of CdS Langmuir-Blodgett multilayers nanoparticles on self-assembled carbon nanotubes (2004), Chemical Physics Letters, 392 (1-3), pp. 214-219.
  272. Picozzi, S., Santucci, S., Lozzi, L., Cantalini, C., Baratto, C., Sberveglieri, G., Armentano, I., Kenny, J.M., Valentini, L., Delley, B. Ozone adsorption on carbon nanotubes: Ab initio calculations and experiments (2004), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 22 (4), pp. 1466-1470.
  273. López-Manchado, M.A., Biagiotti, J., Valentini, L., Kenny, J.M. Dynamic mechanical and Raman spectroscopy studies on interaction between single-walled carbon nanotubes and natural rubber (2004), Journal of Applied Polymer Science, 92 (5), pp. 3394-3400.
  274. Valentini, L., Armentano, I., Lozzi, L., Santucci, S., Kenny, J.M. Interaction of methane with carbon nanotube thin films: Role of defects and oxygen adsorption (2004), Materials Science and Engineering C, 24 (4), pp. 527-533.
  275. Valentini, L., Cantalini, C., Lozzi, L., Picozzi, S., Armentano, I., Kenny, J.M., Santucci, S. Effects of oxygen annealing on cross sensitivity of carbon nanotubes thin films for gas sensing applications (2004), Sensors and Actuators, B: Chemical, 100 (1-2), pp. 33-40.
  276. Pennacchi, M., Armentano, I., Zeppetelli, S., Fiorillo, M., Guarnieri, D., Kenny, J.M., Netti, P.A. Influence of surface patterning on cell migration and spreading (2004), European Cells and Materials, 7 (SUPPL.1), p. 77. Cited 1 time.
  277. Cantalini, C., Valentini, L., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Carbon nanotubes as new materials for gas sensing applications (2004), Journal of the European Ceramic Society, 24 (6), pp. 1405-1408.
  278. Alvarez, V.A., Kenny, J.M., Vázquez, A. Creep behavior of biocomposites based on sisal fiber reinforced cellulose derivatives/starch blends (2004), Polymer Composites, 25 (3), pp. 280-288.
  279. Marcovich, N.E., Reboredo, M.M., Kenny, .J., Aranguren, M.I. Rheology of particle suspensions in viscoelastic media. Wood flour-polypropylene melt (2004), Rheologica Acta, 43 (3), pp. 293-303.
  280. Biagiotti, J., Iannoni, A., Lopez-Manchado, M.A., Kenny, J.M. Cure characteristics, mechanical properties, and morphological studies of linoleum flour-filled NBR compounds (2004), Polymer Engineering and Science, 44 (5), pp. 909-916.
  281. Valentini, L., Mercuri, F., Armentano, I., Cantalini, C., Picozzi, S., Lozzi, L., Santucci, S., Sgamellotti, A., Kenny, J.M. Role of defects on the gas sensing properties of carbon nanotubes thin films: Experiment and theory (2004), Chemical Physics Letters, 387 (4-6), pp. 356-361.
  282. Valentini, L., Cantalini, C., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Highly sensitive and selective sensors based on carbon nanotubes thin films for molecular detection (2004), Diamond and Related Materials, 13 (4-8), pp. 1301-1305.
  283. Bregliozzi, G., Di Schino, A., Kenny, J.M., Haefke, H. Influence of atmospheric humidity and grain size on the friction and wear of high nitrogen austenitic stainless steel (2004), Journal of Materials Science, 39 (4), pp. 1481-1484.
  284. Valentini, L., Armentano, I., Puglia, D., Lozzi, L., Santucci, S., Kenny, J.M. A deeper understanding of the photodesorption mechanism of aligned carbon nanotube thin films by impedance spectroscopy (2004), Thin Solid Films, 449 (1-2), pp. 105-112.
  285. Valentini, L., Armentano, I., Biagiotti, J., Marigo, A., Santucci, S., Kenny, J.M. AC conductivity of conjugated polymer onto self-assembled aligned carbon nanotubes (2004), Diamond and Related Materials, 13 (2), pp. 250-255.
  286. Valentini, L., Biagiotti, J., López-Manchado, M.A., Santucci, S., Kenny, J.M. Effects of Carbon Nanotubes on the Crystallization Behavior of Polypropylene (2004), Polymer Engineering and Science, 44 (2), pp. 303-311.
  287. Biagiotti, J., Fiori, S., Torre, L., López-Manchado, M.A., Kenny, J.M. Mechanical Properties of Polypropylene Matrix Composites Reinforced with Natural Fibers: A Statistical Approach (2004), Polymer Composites, 25 (1), pp. 26-36.
  288. Valentini, L., Di Schino, A., Kenny, J.M., La Rosa, S., Lozzi, L., Santucci, S., Bregliozzi, G., Gerbig, Y., Haefke, H. Wear resistance of fine-grained high nitrogen austenitic stainless steel coated with amorphous carbon films: The soft X-ray spectroscopy approach (2004), Tribology Letters, 16 (1-2), pp. 51-58.
  289. Valentini, L., Armentano, I., Puglia, D., Kenny, J.M. Dynamics of amine functionalized nanotubes/epoxy composites by dielectric relaxation spectroscopy (2004), Carbon, 42 (2), pp. 323-329.
  290. Valentini, L., Bavastrello, V., Stura, E., Armentano, I., Nicolini, C., Kenny, J.M. Sensors for inorganic vapor detection based on carbon nanotubes and poly(o-anisidine) nanocomposite material (2004), Chemical Physics Letters, 383 (5-6), pp. 617-622.
  291. Valentini, L., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Controllable fabrication of aligned carbon nanotubes by pulsed plasma: Selective positioning and electrical transport phenomena (2004), Materials Letters, 58 (3-4), pp. 470-473.
  292. Valentini, L., Puglia, D., Frulloni, E., Armentano, I., Kenny, J.M., Santucci, S. Dielectric behavior of epoxy matrix/single-walled carbon nanotube composites (2004), Composites Science and Technology, 64 (1), pp. 23-33.
  293. Ivankovic, M., Incarnato, L., Kenny, J.M., Nicolais, L. Curing kinetics and chemorheology of epoxy/anhydride system (2003), Journal of Applied Polymer Science, 90 (11), pp. 3012-3019.
  294. Di Schino, A., Barteri, M., Kenny, J.M. Effects of grain size on the properties of a low nickel austenitic stainless steel (2003), Journal of Materials Science, 38 (23), pp. 4725-4733.
  295. Picozzi, S., Lozzi, L., Santucci, S., Cantalini, C., Baratto, C., Sberveglieri, G., Armentano, I., Kenny, J.M., Valentini, L., Delley, B. Ozone reactivity with carbon nanotubes: Experimental and theoretical studies (2003), Proceedings of IEEE Sensors, 2 (1), pp. 436-439.
  296. Cantalini, C., Valentini, L., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. An innovative approach to gas sensing using carbon nanotubes thin films: Sensitivity, selectivity and stability response analysis (2003), Proceedings of IEEE Sensors, 2 (1), pp. 424-427.
  297. di Schino, A., Abbruzzese, G., Kenny, J.M. Recrystallization and grain growth in austenitic stainless steels: A statistical approach (2003), Journal of Materials Science and Technology, 19 (SUPPL.), pp. 119-121.
  298. Jiménez, A., Torre, L., Kenny, J.M. Processing and properties of recycled polypropylene modified with elastomers (2003), Plastics, Rubber and Composites, 32 (8-9), pp. 357-367.
  299. Bregliozzi, G., Ahmed, S.I.-U., Di Schino, A., Kenny, J.M., Haefke, H. Cavitation erosion and friction behavior of stainless steel as a function of grain size (2003), Materials Research Society Symposium - Proceedings, 782, pp. 235-240.
  300. Torre, L., Frulloni, E., Kenny, J.M., Manferti, C., Camino G. Processing and characterization of epoxy-anhydride-based intercalated nanocomposites (2003), Journal of Applied Polymer Science, 90 (9), pp. 2532-2539.
  301. Santucci, S., Picozzi, S., Di Gregorio, F., Lozzi, L., Cantalini, C., Valentini, L., Kenny, J.M., Delley, B. NO2 and CO gas adsorption on carbon nanotubes: Experiment and theory (2003), Journal of Chemical Physics, 119 (20), pp. 10904-10910.
  302. López Manchado, M.A., Arroyo, M., Biagiotti, J., Kenny, J.M. Enhancement of Mechanical Properties and Interfacial Adhesion of PP/EPDM/Flax Fiber Composites Using Maleic Anhydride as a Compatibilizer (2003), Journal of Applied Polymer Science, 90 (8), pp. 2170-2178.
  303. Bregliozzi, G., Di Schino, A., Kenny, J.M., Haefke, H. The influence of atmospheric humidity and grain size on the friction and wear of AISI 304 austenitic stainless steel (2003), Materials Letters, 57 (29), pp. 4505-4508.
  304. Puglia, D., Tomassucci, A., Kenny, J.M. Processing, properties and stabiliy of biodegradable composites based on mater-bi© and cellulose fibres (2003), Polymers for Advanced Technologies, 14 (11-12), pp. 749-756.
  305. Di Schino, A., Barteri, M., Kenny, J.M. Fatigue behavior of a high nitrogen austenitic stainless steel as a function of its grain size (2003), Journal of Materials Science Letters, 22 (21), pp. 1511-1513.
  306. Valentini, L., Bellachioma, M.C., Ahmed, S.I.-U., Bregliozzi, G., Gerbig, Y., Haefke, H., Lozzi, L., Santucci, S., Kenny, J.M. Fluorinated amorphous carbon thin films: Analysis of the role of the plasma excitation mode on the structural and mechanical properties (2003), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 21 (6), pp. 1964-1970.
  307. Navarro, R., Torre, L., Kenny, J.M., Jiménez, A. Thermal degradation of recycled polypropylene toughened with elastomers (2003), Polymer Degradation and Stability, 82 (2), pp. 279-290.
  308. Cantalini, C., Valentini, L., Armentano, I., Lozzi, L., Kenny, J.M., Santucci, S. Sensitivity to NO2 and cross-sensitivity analysis to NH 3, ethanol and humidity of carbon nanotubes thin film prepared by PECVD (2003), Sensors and Actuators, B: Chemical, 95 (1-3), pp. 195-202.
  309. Valentini, L., Cantalini, C., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Investigation of the NO2 sensitivity properties of multiwalled carbon nanotubes prepared by plasma enhanced chemical vapor deposition (2003), Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 21 (5), pp. 1996-2000.
  310. Valentini, L., Salerni, V., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Fluorinated amorphous carbon films prepared by plasma enhanced chemical vapor deposition for solar cell applications (2003), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 21 (5), pp. 1784-1790.
  311. Valentini, L., Armentano, I., Santilli, P., Kenny, J.M., Lozzi, L., Santucci, S. Electrical transport properties of conjugated polymer onto self-assembled aligned carbon nanotubes (2003), Diamond and Related Materials, 12 (9), pp. 1524-1531.
  312. Valentini, L., Armentano, I., Biagiotti, J., Frulloni, E., Kenny, J.M., Santucci, S. Frequency dependent electrical transport between conjugated polymer and single-walled carbon nanotubes (2003), Diamond and Related Materials, 12 (9), pp. 1601-1609.
  313. Di Schino, A., Barteri, M., Kenny, J.M. Grain size dependence of mechanical, corrosion and tribological properties of high nitrogen stainless steels (2003), Journal of Materials Science, 38 (15), pp. 3257-3262.
  314. Cantalini, C., Valentini, L., Lozzi, L., Armentano, I., Kenny, J.M., Santucci, S. NO2 gas sensitivity of carbon nanotubes obtained by plasma enhanced chemical vapor deposition (2003), Sensors and Actuators, B: Chemical, 93 (1-3), pp. 333-337.
  315. Alvarez, V.A., Kenny, J.M., Vázquez, A. Isothermal crystallization of poly(vinyl alcohol-co-ethylene) (2003), Journal of Applied Polymer Science, 89 (4), pp. 1071-1077.
  316. Valentini, L., Lozzi, L., Cantalini, C., Armentano, I., Kenny, J.M., Ottaviano, L., Santucci, S. Effects of oxygen annealing on gas sensing properties of carbon nanotube thin films (2003), Thin Solid Films, 436 (1), pp. 95-100.
  317. Di Schino, A., Salvatori, I., Kenny, J.M. The effect of grain size on the mechanical and cavitation resistance of a high nitrogen and low nickel austenitic stainless steel (2003), Materials Science Forum, 426-432 (2), pp. 975-980.
  318. Di Schino, A., Kenny, J.M., Abbruzzese, G. Modelling primary recrystallization and grain growth in the AlSl 316 stainless steel (2003), Materials Science Forum, 426-432 (2), pp. 1011-1016.
  319. Corezzi, S., Fioretto, D., Puglia, D., Kenny, J.M. Light scattering study of vitrification during the polymerization of model epoxy resins (2003), Macromolecules, 36 (14), pp. 5271-5278.
  320. Valentini, L., Salerni, V., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Effects of fluorine incorporation on the properties of amorphous carbon/p-type crystalline silicon heterojunction diodes (2003), Journal of Non-Crystalline Solids, 321 (3), pp. 175-182.
  321. Valentini, L., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Pulsed plasma-induced alignment of carbon nanotubes (2003), Materials Letters, 57 (22-23), pp. 3699-3704.
  322. Di Schino, A., Kenny, J.M. Grain size dependence of the fatigue behaviour of a ultrafine-grained AISI 304 stainless steel (2003), Materials Letters, 57 (21), pp. 3182-3185.
  323. Bregliozzi, G., Di Schino, A., Haefke, H., Kenny, J.M. Cavitation erosion resistance of a high nitrogen austenitic stainless steel as a function of its grain size (2003), Journal of Materials Science Letters, 22 (13), pp. 981-983.
  324. Valentini, L., Biagiotti, J., Kenny, J.M., López Manchado, M.A. Physical and mechanical behavior of single-walled carbon nanotube/polypropylene/ethylene-propylene-diene rubber nanocomposites (2003), Journal of Applied Polymer Science, 89 (10), pp. 2657-2663.
  325. Valentini, L., Cantalini, C., Lozzi, L., Armentano, I., Kenny, J.M., Santucci, S. Reversible oxidation effects on carbon nanotubes thin films for gas sensing applications (2003), Materials Science and Engineering C, 23 (4), pp. 523-529.
  326. Valentini, L., Biagiotti, J., Kenny, J.M., Santucci, S. Morphological characterization of single-walled carbon nanotubes-PP composites (2003), Composites Science and Technology, 63 (8), pp. 1149-1153.
  327. Nuñez, A.J., Sturm, P.C., Kenny, J.M., Aranguren, M.I., Marcovich, N.E., Reboredo, M.M. Mechanical characterization of polypropylene-wood flour composites (2003), Journal of Applied Polymer Science, 88 (6), pp. 1420-1428.
  328. López-Manchado, M.A., Biagiotti, J., Arroyo, M., Kenny, J.M. Ternary Composites Based on PP-EPDM Blends Reinforced With Flax Fibers. Part I: Processing and Thermal Behavior (2003), Polymer Engineering and Science, 43 (5), pp. 1018-1030.
  329. Valentini, L., Lozzi, L., Salerni, V., Armentano, I., Kenny, J.M., Santucci, S. Effect of thermal annealing on the electronic properties of nitrogen doped amorphous carbon/p-type crystalline silicon heterojunction diodes (2003), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 21 (3), pp. 582-588.
  330. Di Schino, A., Kenny, J.M., Barteri, M. High temperature resistance of a high nitrogen and low nickel austenitic stainless steel (2003), Journal of Materials Science Letters, 22 (9), pp. 691-693.
  331. Biagiotti, J., López-Manchado, M.A., Arroyo, M., Kenny, J.M. Ternary Composites Based on PP-EPDM Blends Reinforced With Flax Fibers. Part II: Mechanical Properties/Morphology Relationship (2003), Polymer Engineering and Science, 43 (5), pp. 1031-1043.
  332. Puglia, D., Valentini, L., Kenny, J.M. Analysis of the cure reaction of carbon nanotubes/epoxy resin composites through thermal analysis and Raman spectroscopy (2003), Journal of Applied Polymer Science, 88 (2), pp. 452-458.
  333. Puglia, D., Valentini, L., Armentano, I., Kenny, J.M. Effects of single-walled carbon nanotube incorporation on the cure reaction of epoxy resin and its detection by Raman spectroscopy (2003), Diamond and Related Materials, 12 (3-7), pp. 827-832.
  334. Valentini, L., Armentano, I., Kenny, J.M., Lozzi, L., Santucci, S. Effect of catalyst layer thickness and Ar dilution on the plasma deposition of multi-walled carbon nanotubes (2003), Diamond and Related Materials, 12 (3-7), pp. 821-826.
  335. Di Schino, A., Kenny, J.M. Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel (2003), Materials Letters, 57 (12), pp. 1830-1834.
  336. Valentini, L., Armentano, I., Kenny, J.M., Cantalini, C., Lozzi, L., Santucci, S. Sensors for sub-ppm NO2 gas detection based on carbon nanotube thin films (2003), Applied Physics Letters, 82 (6), pp. 961-963.
  337. Valentini, L., Biagiotti, J., Kenny, J.M., Santucci, S. Effects of single-walled carbon nanotubes on the crystallization behavior of polypropylene (2003), Journal of Applied Polymer Science, 87 (4), pp. 708-713.
  338. Valentini, L., Kenny, J.M., La Rosa, S., Gerbig, Y., Haefke, H., Lozzi, L., Santucci, S. Spectroscopic analysis of the structure of amorphous nitrogenated carbon films after wear tests (2003), Thin Solid Films, 423 (1), pp. 108-114.
  339. Valentini, L., Di Schino, A., Kenny, J.M., Gerbig, Y., Haefke, H. Wear resistance of a high nitrogen austenitic stainless steel coated with amorphous carbon films: Influence of grain size and film composition (2003), Materials Letters, 57 (7), pp. 1281-1287.
  340. Di Schino, A., Kenny, J.M., Abbruzzese, G. Analysis of the recrystallization and grain growth processes in AISI 316 stainless steel (2002), Journal of Materials Science, 37 (24), pp. 5291-5298.
  341. Di Schino, A., Kenny, J.M. Effect of grain size on the corrosion resistance of a high nitrogen-low nickel austenitic stainless steel (2002), Journal of Materials Science Letters, 21 (24), pp. 1969-1971.
  342. Di Schino, A., Valentini, L., Kenny, J.M., Gerbig, Y., Ahmed, I., Haefke, H. Wear resistance of a high-nitrogen austenitic stainless steel coated with nitrogenated amorphous carbon films (2002), Surface and Coatings Technology, 161 (2-3), pp. 224-231.
  343. Santucci, S., Valentini, L., Menelle, A., Lozzi, L., Coppola, R., Kenny, J.M. Ar dilution effects on hydrogen concentration and mass density obtained by X-ray and neutron reflectivity on hydrogenated amorphous nitride thin films (2002), Applied Physics A: Materials Science and Processing, 74 (SUPPL.II), pp. S1104-S1106.
  344. Valentini, L., Kenny, J.M., Lozzi, L., Santucci, S. Formation of carbon nanotubes by plasma enhanced chemical vapor deposition: Role of nitrogen and catalyst layer thickness (2002), Journal of Applied Physics, 92 (10), pp. 6188-6194.
  345. Di Schino, A., Salvatori, I., Kenny, J.M. Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel (2002), Journal of Materials Science, 37 (21), pp. 4561-4565.
  346. Di Schino, A., Kenny, J.M. Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels (2002), Journal of Materials Science Letters, 21 (20), pp. 1631-1634.
  347. López-Manchado, M.A., Biagitti, J., Kenny, J.M. Comparative study of the effects of different fibers on the processing and properties of ternary composites based on PP-EPDM blends (2002), Polymer Composites, 23 (5), pp. 779-789.
  348. Valentini, L., Bellachioma, M.C., Lozzi, L., Santucci, S., Kenny, J.M. Helium permeation through a-C:H films deposited on polymeric substrates (2002), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 20 (5), pp. 1647-1652.
  349. Frigione, M., Kenny, J.M. Thermokinetic effects of the aging of epoxy matrix prepregs for high performance composites (2002), Polymer Composites, 23 (4), pp. 530-537.
  350. Valentini, L., Di Schino, A., Kenny, J.M., Gerbig, Y., Haefke, H. Influence of grain size and film composition on wear resistance of ultra fine grained AISI 304 stainless steel coated with amorphous carbon films (2002), Wear, 253 (3-4), pp. 458-464.
  351. Braca, E., Saraceni, G., Kenny, J.M., Lozzi, L., Santucci, S. Structural and optical properties of nitrogen and oxygen doped a-C:H coatings (2002), Thin Solid Films, 415 (1-2), pp. 195-200.
  352. Aguilar, M., Alcaraz, J., Allaby, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buénerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Cho, K., Choi, M.J., Choi, Y.Y., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cortina-Gil, E., Cristinziani, M., da Cunha, J.P., Dai, T.S., Delgado, C., Deus, J.D., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimms, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, D.H., Kim, G.N., Kim, K.S., Kim, M.Y., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Lanciotti, E., Laurenti, G., Lebedev, A., Lechanoine-Leluc, C., Lee, M.W., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maña, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, H.B., Park, W.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Pohl, M., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Ro, S., Roeser, U., Rossin, C., Sagdeev, R., Santos, D., Sartorelli, G., Sbarra, C., Schael, S., von Dratzig, A.S., Schwering, G., Scolieri, G., Seo, E.S., Shin, J.W., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Ting, S.C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., WU, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, J., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B., Zuccon, P. The Alpha Magnetic Spectrometer (AMS) on the international space station: Part I - Results from the test flight on the space shuttle (2002), Physics Report, 366 (6), pp. 331-405.
  353. López-Manchado, M.A., Kenny, J.M. Analysis of the effects of the polymerization route of ethylene-propylene-diene rubbers (EPDM) on the properties of polypropylene-EPDM blends (2002), Journal of Applied Polymer Science, 85 (1), pp. 25-37.
  354. Valentini, L., Kenny, J.M., Montereali, R.M., Lozzi, L., Santucci, S. Influence of nitrogen and temperature on the plasma deposition of fluorinated amorphous carbon films (2002), Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 20 (4), pp. 1210-1215.
  355. López-Manchado, M.A., Biagiotti, J., Kenny, J.M. Comparative study of the effects of different fibers on the processing and properties of polypropylene matrix composites (2002), Journal of Thermoplastic Composite Materials, 15 (4), pp. 337-353.
  356. Schino, A.D., Barteri, M., Kenny, J.M. Development of ultra fine grain structure by martensitic reversion in stainless steel (2002), Journal of Materials Science Letters, 21 (9), pp. 751-753.
  357. Valentini, L., Braca, E., Kenny, J.M., Fedosenko, G., Engemann, J., Lozzi, L., Santucci, S. Nitrogen doping of fluorinated amorphous carbon thin films: Structural and optical properties evolution upon thermal annealing (2002), Thin Solid Films, 408 (1-2), pp. 291-296.
  358. Valentini, L., Kenny, J.M., Montereali, R.M., Lozzi, L., Santucci, S. Structural changes of fluorinated amorphous carbon films by nitrogen incorporation (2002), Materials Science in Semiconductor Processing, 5 (2-3), pp. 271-277.
  359. Nuñez, A.J., Kenny, J.M., Reboredo, M.M., Aranguren, M.I., Marcovich, N.E. Thermal and dynamic mechanical characterization of polypropylene-woodflour composites (2002), Polymer Engineering and Science, 42 (4), pp. 733-742.
  360. Fedosenko, G., Schwabedissen, A., Engemann, J., Braca, E., Valentini, L., Kenny, J.M. Pulsed PECVD deposition of diamond-like carbon films (2002), Diamond and Related Materials, 11 (3-6), pp. 1047-1052.
  361. Valentini, L., Braca, E., Kenny, J.M., Fedosenko, G., Engemann, J., Lozzi, L., Santucci, S. Analysis of the role of fluorine content on the thermal stability of a-C:H:F thin films (2002), Diamond and Related Materials, 11 (3-6), pp. 1100-1105.
  362. Santucci, S., Lozzi, L., Valentini, L., Kenny, J.M., Menelle, A. Hydrogen concentrations and mass density obtained by X-ray and neutron reflectivity on hydrogenated amorphous carbon nitride thin films (2002), Diamond and Related Materials, 11 (3-6), pp. 1188-1192.
  363. Antoniella, F., Valentini, L., Continenza, A., Lozzi, L., Santucci, S. Study of different phases in a-C:H:N thin films deposited by plasma-enhanced chemical vapour deposition: A comparison between theoretical and experimental data (2001), Materials Research Society Symposium - Proceedings, 672, pp. O8.12.1-O8.12.5.
  364. Ruseckaite, R.A., Stefani, P.M., Cyras, V.P., Kenny, J.M., Vzquez, A. Temperature and crystallinity profiles generated in a polycaprolactone/starch blend under different cooling conditions (2001), Journal of Applied Polymer Science, 82 (13), pp. 3275-3283.
  365. Valentini, L., Braca, E., Kenny, J.M, Lozzi, L., Santucci, S. Influence of plasma source frequency on composition and density of fluorinated amorphous carbon thin films (2001), Materials Letters, 51 (6), pp. 514-518.
  366. Torre, L., Kenny, J.M. Evaluation of energy absorption properties of crashworthy sandwich structures (2001), International SAMPE Technical Conference, 33, pp. 1478-1490.
  367. Valentini, L., Kenny, J.M., Mariotto, G., Tosi, P. Deposition of hydrogenated amorphous carbon films from CH4/Ar plasmas: Ar dilution effects (2001), Journal of Materials Science, 36 (21), pp. 5295-5300.
  368. Valentini, L., Kenny, J.M., Gerbig, Y., Savan, A., Haefke, H., Lozzi, L., Santucci, S. Structure and mechanical properties of argon assisted carbon nitride films (2001), Thin Solid Films, 398-399, pp. 124-129.
  369. Valentini, L., Braca, E., Kenny, J.M., Lozzi, L., Santucci, S. Relationship between the optical and mechanical properties of fluorinated amorphous carbon thin films (2001), Journal of Non-Crystalline Solids, 291 (3), pp. 153-159.
  370. Di Schino, A., Kenny, J.M., Salvatori, I., Abbruzzese, G. Modelling primary recrystallization and grain growth in a low nickel austenitic stainless steel (2001,) Journal of Materials Science, 36 (3), pp. 593-601.
  371. Jiménez, A., Torre, L., Kenny, J.M. Thermal degradation of poly(vinyl chloride) plastisols based on low-migration polymeric plasticizers (2001), Polymer Degradation and Stability, 73 (3), pp. 447-453.
  372. Puglia, D., Manfredi, L.B., Vazquez, A., Kenny, J.M. Thermal degradation and fire resistance of epoxy-amine-phenolic blends (2001), Polymer Degradation and Stability, 73 (3), pp. 521-527.
  373. Cyras, V.P., Vázquez, A., Kenny, J.M. Crystallization kinetics by differential scanning calorimetry for PCL/Starch and their reinforced sisal fiber composites (2001), Polymer Engineering and Science, 41 (9), pp. 1521-1528.
  374. Valentini, L., Braca, E., Kenny, J.M., Lozzi, L., Santucci, S. Fluorinated amorphous carbon thin films: Analysis of the role of the plasma source frequency on the structural and optical properties (2001), Journal of Vacuum Science and Technology, Part A: Vacuum, Surfaces and Films, 19 (5), pp. 2168-2173.
  375. Jimenez, A., Lopez, J., Iannoni, A., Kenny, J.M. Formulation and mechanical characterization of PVC plastisols based on low-toxicity additives (2001), Journal of Applied Polymer Science, 81 (8), pp. 1881-1890.
  376. Braca, E., Kenny, J.M., Korzec, D., Engemann, J. Transition from polymer-like to diamond-like carbon coatings synthesized by a hybrid radiofrequency-microwave plasma source (2001), Thin Solid Films, 394 (1-2), pp. 30-39.
  377. López Manchado, M.A., Torre, L., Kenny, J.M. Kinetic crystallization of polypropylene in ternary composites based on fiber-reinforced PP-EPDM blends (2001), Journal of Applied Polymer Science, 81 (5), pp. 1063-1074.
  378. López-Manchado, M.A., Kenny, J.M., Quijada, R., Yazdani-Pedram, M. Effect of grafted PP on the properties of thermoplastic elastomers based on PP-EPDM blends (2001), Macromolecular Chemistry and Physics, 202 (9), pp. 1909-1916.
  379. López Manchado, M.A., Biagiotti, J., Kenny, J.M. Rheological behavior and processability of polypropylene blends with rubber ethylene propylene diene terpolymer (2001), Journal of Applied Polymer Science, 81 (1), pp. 1-10.
  380. Valentini, L., Kenny, J.M., Carlotti, G., Guerrieri, M., Signorelli, G., Lozzi, L., Santucci, S. Effect of nitrogen addition on the elastic and structural properties of amorphous carbon thin films (2001), Thin Solid Films, 389 (1-2), pp. 315-320.
  381. López-Manchado, M.A., Arroyo, M., Kenny, J.M. New developments in dynamically cured PP-EPDM blends (2001), Rubber Chemistry and Technology, 74 (2), pp. 211-220.
  382. López Manchado, M.A., Kenny, J.M. Use of benzene-1,3-bis(sulfonyl)azide as crosslinking agent of TPVS based on EPDM rubber-polyolefin blends (2001), Rubber Chemistry and Technology, 74 (2), pp. 198-210.
  383. Fedosenko, G., Korzec, D., Schwabedissen, A., Engemann, J., Braca, E., Kenny, J.M. Comparison of diamond-like carbon films synthesized by 2.45 GHz microwave and 13.56 MHz multi-jet radiofrequency plasma sources (2001,) Diamond and Related Materials, 10 (3-7), pp. 920-926.
  384. Valentini, L., Kenny, J.M., Mariotto, G., Tosi, P., Carlotti, G., Fioretto, D., Lozzi, L., Santucci, S. Ar-dilution effects on the elastic and structural properties of hydrogenated hard carbon films deposited by plasma-enhance chemical vapor deposition (2001), Diamond and Related Materials, 10 (3-7), pp. 1088-1092.
  385. Cyras, V.P., Iannace, S., Kenny, J.M., Vazquez, A. Relationship between processing and properties of biodegradable composites based on PCL/starch matrix and sisal fibers (2001,) Polymer Composites, 22 (1), pp. 104-110.
  386. Valentini, L., Kenny, J.M., Carlotti, G., Socino, G., Lozzi, L., Santucci, S. Ar dilution effects on the elastic properties of hydrogenated amorphous hard-carbon films grown by plasma-enhanced chemical vapor deposition (2001), Journal of Applied Physics, 89 (2), pp. 1003-1007.
  387. Barbosa, S.E., Capiati, N.J., Kenny, J.M. Processability and mechanical properties of ternary composites PP/EPDM/GF (2000), Polymer Composites, 21 (3), pp. 377-386.
  388. Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cristinziani, M., Da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Yu., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Etal. Helium in near earth orbit (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 494 (3-4), pp. 193-202.
  389. Torre, L., Kenny, J.M. Impact testing and simulation of composite sandwich structures for civil transportation (2000), Composite Structures, 50 (3), pp. 257-267.
  390. Barbosa, S.E., Kenny, J.M. Analysis of the ductility on short fiber reinforced polypropylene plates (2000), Journal of Elastomers and Plastics, 32 (4), pp. 302-310.
  391. López Manchado, M.A., Biagiotti, J., Torre, L., Kenny, J.M. Effects of reinforcing fibers on the crystallization of polypropylene (2000), Polymer Engineering and Science, 40 (10), pp. 2194-2204.
  392. Di Schino, A., Kenny, J.M., Mecozzi, M.G., Barteri, M. Development of high nitrogen, low nickel, 18%Cr austenitic stainless steels (2000), Journal of Materials Science, 35 (19), pp. 4803-4808.
  393. Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Crespo, P., Cristinziani, M., da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maña, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Pohl, M., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Sartorelli, G., Schultz von Dratzig, A., Schwering, G., Scolieri, G., Seo, E.S., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Samuel Ting, C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., Von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B. Cosmic protons (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 490 (1-2), pp. 27-35.
  394. Torre, L., Kenny, J.M., Boghetich, G., Maffezzoli, A. Degradation behaviour of a composite material for thermal protection systems. Part III. Char characterization (2000), Journal of Materials Science, 35 (18), pp. 4563-4566.
  395. López-Manchado, M., Torre, L., Kenny, J.M. Kinetic analysis of the thermal degradation of PP-EPDM blends (2000), Rubber Chemistry and Technology, 73 (4), pp. 694-705.
  396. Cyras, V.P., Vázquez, A., Rozsa, Ch., Galego Fernández, N., Torre, L., Kenny, J.M. Thermal stability of P(HB-co-HV) and its blends with polyalcohols: crystallinity, mechanical properties, and kinetics of degradation (2000), Journal of Applied Polymer Science, 77 (13), pp. 2889-2900.
  397. Alcaraz, J., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Boschini, M., Bourquin, M., Brocco, L., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Cecchi, C., Chang, Y.H., Chen, H.F., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Crespo, P., Cristinziani, M., da Cunha, J.P., Dai, T.S., Deus, J.D., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Engelberg, J., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Fiandrini, E., Fisher, P.H., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Grandi, D., Grimm, O., Gu, W.Q., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Jongmanns, M., Karlamaa, K., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Kossakowski, R., Koutsenko, V., Kraeber, M., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Liu, C.L., Liu, H.T., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maña, C., Margotti, A., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mihul, A., Mourao, A., Mujunen, A., Palmonari, F., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pimenta, M., Plyaskin, V., Pojidaev, V., Postolache, V., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Sartorelli, G., Schultz von Dratzig, A., Schwering, G., Scolieri, G., Seo, E.S., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Samuel Ting, C.C., Ting, S.M., Tornikoski, M., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velcea, F., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., von Gunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wiik, K., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Ye, S.W., Yeh, P., Xu, Z.Z., Zhang, H.Y., Zhang, Z.P., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A., Zimmermann, B. Leptons in near earth orbit (2000), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 484 (1-2), pp. 10-22.
  398. Barbosa, S.E., Kenny, J.M. Processing of short-fiber reinforced polypropylene. I. Influence of processing conditions on the morphology of extruded filaments (2000) Polymer Engineering and Science, 40 (1), pp. 11-22.
  399. López Manchado, M.A., Biagiotti, J., Torre, L., Kenny, J.M. Polypropylene crystallization in an ethylene-propylene-diene rubber matrix (2000,) Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 437-450.
  400. Di Schino, A., Mecozzi, M.G., Barteri, M., Kenny, J.M. Solidification mode and residual ferrite in low-Ni austenitic stainless steels (2000), Journal of Materials Science, 35 (2), pp. 375-380.
  401. Jiménez, A., Iannoni, A., Torre, L., Kenny, J.M. Kinetic modeling of the thermal degradation of stabilized PVC plastisols (2000), Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 483-491.
  402. Torre, L., Kenny, J.M., Recca, A., Siracusa, V., Tarzia, A., Maffezzoli, A. Study of the crystallization of an aromatic poly-ether-ketone (PK99) by calorimetric and X-ray analysis (2000), Journal of Thermal Analysis and Calorimetry, 61 (2), pp. 565-578.
  403. López-Manchado, M.A., Biagiotti, J., Arroyo, M., Kenny, J.M. Processing, properties and morphology of polypropylene-EPDM blends (1999), Macromolecular Symposia, 148, pp. 345-360.
  404. Alcaraz, J., Alvisi, D., Alpat, B., Ambrosi, G., Anderhub, H., Ao, L., Arefiev, A., Azzarello, P., Babucci, E., Baldini, L., Basile, M., Barancourt, D., Barao, F., Barbier, G., Barreira, G., Battiston, R., Becker, R., Becker, U., Bellagamba, L., Béné, P., Berdugo, J., Berges, P., Bertucci, B., Biland, A., Bizzaglia, S., Blasko, S., Boella, G., Bourquin, M., Bruni, G., Buenerd, M., Burger, J.D., Burger, W.J., Cai, X.D., Cavalletti, R., Camps, C., Cannarsa, P., Capell, M., Casadei, D., Casaus, J., Castellini, G., Chang, Y.H., Chen, H.S., Chen, Z.G., Chernoplekov, N.A., Chiarini, A., Chiueh, T.H., Chuang, Y.L., Cindolo, F., Commichau, V., Contin, A., Cotta-Ramusino, A., Crespo, P., Cristinziani, M., daCunha, J.P., Dai, T.S., Deus, J.D., Ding, L.K., Dinu, N., Djambazov, L., D'Antone, I., Dong, Z.R., Emonet, P., Eppling, F.J., Eronen, T., Esposito, G., Extermann, P., Favier, J., Feng, C.C., Fiandrini, E., Finelli, F., Fisher, P.H., Flaminio, R., Fluegge, G., Fouque, N., Galaktionov, Y., Gervasi, M., Giusti, P., Gu, W.Q., Guzik, T.G., Hangarter, K., Hasan, A., Hermel, V., Hofer, H., Huang, M.A., Hungerford, W., Ionica, M., Ionica, R., Isbert, J., Jongmanns, M., Karpinski, W., Kenney, G., Kenny, J., Kim, W., Klimentov, A., Krieger, J., Kossakowski, R., Koutsenko, V., Laborie, G., Laitinen, T., Lamanna, G., Laurenti, G., Lebedev, A., Lee, S.C., Levi, G., Levtchenko, P., Li, T.P., Liu, C.L., Liu, H.T., Lolli, M., Lopes, I., Lu, G., Lu, Y.S., Lübelsmeyer, K., Luckey, D., Lustermann, W., Maehlum, G., Maña, C., Margotti, A., Massera, F., Mayet, F., McNeil, R.R., Meillon, B., Menichelli, M., Mezzanotte, F., Mezzenga, R., Mihul, A., Molinari, G., Mourao, A., Mujunen, A., Palmonari, F., Pancaldi, G., Papi, A., Park, I.H., Pauluzzi, M., Pauss, F., Perrin, E., Pesci, A., Pevsner, A., Pilastrini, R., Pimenta, M., Plyaskin, V., Pojidaev, V., Postema, H., Prati, E., Produit, N., Rancoita, P.G., Rapin, D., Raupach, F., Recupero, S., Ren, D., Ren, Z., Ribordy, M., Richeux, J.P., Riihonen, E., Ritakari, J., Roeser, U., Roissin, C., Sagdeev, R., Santos, D., Sartorelli, G., SchultzvonDratzig, A., Schwering, G., Shoutko, V., Shoumilov, E., Siedling, R., Son, D., Song, T., Steuer, M., Sun, G.S., Suter, H., Tang, X.W., Ting, S.C.C., Ting, S.M., Tenbusch, F., Torromeo, G., Torsti, J., Trümper, J., Ulbricht, J., Urpo, S., Usoskin, I., Valtonen, E., Vandenhirtz, J., Velikhov, E., Verlaat, B., Vetlitsky, I., Vezzu, F., Vialle, J.P., Viertel, G., Vité, D., VonGunten, H., Waldmeier Wicki, S., Wallraff, W., Wang, B.C., Wang, J.Z., Wang, Y.H., Wefel, J.P., Werner, E.A., Williams, C., Wu, S.X., Xia, P.C., Yan, J.L., Yan, L.G., Yang, C.G., Yang, M., Yeh, P., Zhang, H.Y., Zhao, D.X., Zhu, G.Y., Zhu, W.Z., Zhuang, H.L., Zichichi, A. Arch for antihelium in cosmic rays (1999), Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 461 (4), pp. 387-396.
  405. Kenny, J.M., Torre, L. Impact testing and simulation of sandwich structures (1999) International SAMPE Symposium and Exhibition (Proceedings), 44, p. II/.
  406. Guarino, F.S., Hauviller, C., Kenny, J.M. Radiation effects on room temperature epoxy adhesive molecular structure: Mechanical tests and correlation with calorimetric and outgassing analyses (1999), Journal of Macromolecular Science - Physics, 38, .
  407. Manfredi, L.B., Claro, J.A., Kenny, J.M., Mondragón Egaña, I., Vázquez, A. Processing and properties of resol and epoxy blends for resin transfer molding (1999), Polymer Composites, 20 (5), pp. 675-682.
  408. Vázquez, A., Domínguez, V.A., Kenny, J.M. Bagasse fiber-polypropylene based composites (1999), Journal of Thermoplastic Composite Materials, 12 (6), pp. 477-497.
  409. Barbosa, S.E., Kenny, J.M. Processing of short fiber reinforced polypropylene. II: statistical study of the effects of processing conditions on the impact strength (1999), Polymer Engineering and Science, 39 (10), pp. 1880-1890.
  410. Aranguren, M.I., Reboredo, M.M., Demma, G., Kenny, J. Oak sawdust and hazelnut shells as fillers for a polyester thermoset(1999), Holz als Roh - und Werkstoff, 57 (5), pp. 325-330.
  411. Buccioni, E., Braca, E., Kenny, J.M., Terranova, M.L. Processing-structure-adhesion relationship in CVD diamond films on titanium substrates (1999), Diamond and Related Materials, 8 (1), pp. 17-24.
  412. Barbosa, Silvia E., Kenny, Jose M. Analysis of the relationship between processing conditions - fiber orientation - final properties in short fiber reinforced polypropylene (1999), Journal of Reinforced Plastics and Composites, 18 (5), pp. 413-420.
  413. Jimenez, A., Lopez, J., Torre, L., Kenny, J.M. Kinetic analysis of the thermal degradation of PVC plastisols (1999), Journal of Applied Polymer Science, 73 (6), pp. 1069-1079.
  414. Torre, L., Kenny, J.M., Maffezzoli, A.M. Degradation behaviour of a composite material for thermal protection systems Part I-Experimental characterization (1998), Journal of Materials Science, 33 (12), pp. 3137-3143.
  415. De La Caba, K., Guerrero, P., Mondragon, I., Kenny, J.M. Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures (1998), Polymer International, 45 (4), pp. 333-338.
  416. Torre, L., Kenny, J.M., Maffezzoli, A.M. Degradation behaviour of a composite material for thermal protection systems. Part II Process simulation (1998), Journal of Materials Science, 33 (12), pp. 3145-3149.
  417. Maffezzoli, A., Torre, L., Kenny, J.M. Determination of the crystallization enthalpy of new-TPI (1998), Journal of Applied Polymer Science, 67 (4), pp. 763-766.
  418. Barbosa, Silvia E., Kenny, Jose M. Dynamic fracture of short fiber reinforced polypropylene (1998,) Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 1437-1441.
  419. Torre, Luigi, Kenny, Jose M. Thermal degradation kinetics of poly ether imide (PEI) (1997) Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 1728-1732.
  420. Barbosa, Silvia E., Kenny, Jose M. Analysis of the relationship between processing conditions - fiber orientation - final properties in short fiber reinforced polypropylene (1997), Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 1855-1859.
  421. Barbosa, Silvia E., Kenny, Jose M., Ercoli, Daniel R., Bibbo, Miguel A. Rheology of fiber suspensions in polymeric systems: An innovative method of experimental testing (1997), Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 2189-2193.
  422. Kenny, J.M., Opalicki, M. Processing of short fibre/thermosetting matrix composites (1996,) Composites Part A: Applied Science and Manufacturing, 27 (3 PART A), pp. 229-240.
  423. Moschiar, S.M., Reboredo, M.M., Kenny, J.M., Vázquez, A. Analysis of pultrusion processing of composites of unsaturated polyester resin with glass fibers (1996), Polymer Composites, 17 (3), pp. 478-485.
  424. Barbosa, Silvia E., Kenny, Jose M. Effects of processing conditions on the microstructure of polypropylene and its short fiber composites (1996), Journal of Engineering and Applied Science, 2, pp. 2246-2255.
  425. Opalicki, M., Kenny, J.M., Nicolais, L. Cure kinetics of neat and carbon-fiber-reinforced TGDDM/DDS epoxy systems (1996), Journal of Applied Polymer Science, 61 (6), pp. 1025-1037.
  426. Mezzenga, R., Guarino, F.S., Butin, F., Perrin, E., Kenny, J.M. Structural analysis of thin composite tubes used in the anti-matter spectrometer (1996), Computer Aided Design in Composite Material Technology - International Conference, pp. 365-374.
  427. Mollinari, M., Marchetti, M., Kenny, J.M. Elasto-plastic fatigue behavior of high performance thermoplastic composite laminates (1996,) Journal of Advanced Materials, 27 (2), pp. 52-60.
  428. Mijovic, J., Andjelic, S., Kenny, J.M. In situ real-time monitoring of epoxy/amine kinetics by remote near infrared spectroscopy (1996), Polymers for Advanced Technologies, 7 (1), pp. 1-16.
  429. Torre, L., Maffezzoli, A., Nicolais, L. Process modelling of thermoset based composites (1995), Revue de l'Institute Francais du Petrole, 50 (1), pp. 135-139.
  430. Kenny, J.M., Pisaniello, G., Farina, F., Puzziello, S. Calorimetric analysis of the polymerization reaction of a phenolic resin (1995), Thermochimica Acta, 269-270 (C), pp. 201-211.
  431. Maffezzoli, A., Kenny, J.M., Torre, L. On the physical dimensions of the Avrami constant (1995), Thermochimica Acta, 269-270 (C), pp. 185-190.
  432. Kenny, J.M., Marchetti, M. Elasto-plastic behavior of thermoplastic composite laminates under cyclic loading (1995), Composite Structures, 32 (1-4), pp. 375-382.
  433. Torre, Luigi, Maffezzoli, Alfonso, Kenny, Jose M. Macrokinetic approach to crystallization applied to a new thermoplastic polyimide (new TPI) as a model polymer (1995), Journal of Applied Polymer Science, 56 (8), pp. 985-993.
  434. Barbosa, Silvia E., Kenny, Jose M. Rheology of thermoplastic matrix short glass fiber composites (1995), Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 3116-3122.
  435. Kenny, Jose M. Chemorheology and processing of short fiber thermosetting matrix composites (1995), Annual Technical Conference - ANTEC, Conference Proceedings, 2, pp. 2782-2789.
  436. Demma, G., Acierno, D., Russo, P., Kenny, J.M. Functionalization of wood waste and its use in polyester type composite. A preliminary study (1995), Journal of Polymer Engineering, 14 (4), pp. 283-293.
  437. Kenny, J.M. Application of modeling to the control and optimization of composites processing (1994), Composite Structures, 27 (1-2), pp. 129-139.
  438. Barbosa, S.E., Ercoli, D.R., Bibbó, M.A., Kenny, JosM. Rheology of short-fiber composites: A systematic approach (1994), Composite Structures, 27 (1-2), pp. 83-91.
  439. Bellucci, Francesco, Valentino, Maio, Monetta, Tullio, Nicodemo, Luigi, Kenny, Jose, Nicolais, Luigi, Mijovic, Jovan, Impedance spectroscopy of reactive polymers. 1 (1994), Journal of Polymer Science, Part B: Polymer Physics, 32 (15), pp. 2519-2527.
  440. Mijovic, Jovan, Nicolais, Luigi, D'Amore, Alberto, Kenny, Jose M. Principal features of structural relaxation in glassy polymers A review (1994), Polymer Engineering and Science, 34 (5), pp. 381-389.
  441. Maffezzoli, A., Trivisano, A., Opalicki, M., Mijovic, J., Kenny, J.M. Correlation between dielectric and chemorheological properties during cure of epoxy-based composites (1994), Journal of Materials Science, 29 (3), pp. 800-808.
  442. Mijovic, J., Kenny, JosM., Nicolais, L. Comparison of kinetic and rheological evaluation of gel time for an amine-epoxy system (1993), Polymer, 34 (1), pp. 207-209.
  443. Kenny, J.M., Trivisano, A., Kardos, J.B., Khomami, B. Mathematical modelling of the resin transfer molding of high performance composites (1993), International SAMPE Symposium and Exhibition (Proceedings), 38 (2), pp. 1263-1274.
  444. Mijovic, J., Kenny, JosM., Maffezzoli, A., Trivisano, A., Bellucci, F., Nicolais, L. The principles of dielectric measurements for in situ monitoring of composite processing (1993), Composites Science and Technology, 49 (3), pp. 277-290.
  445. Kenny, J.M., Maffezzoli, A., Nicolais, L. A new kinetic model for polymer crystallization derived by calorimetric analysis (1993), Thermochimica Acta, 227 (C), pp. 83-95.
  446. Kenny, J.M., Torre, L., Nicolais, L. Short- and long-term degradation of polymer-based composites (1993), Thermochimica Acta, 227 (C), pp. 97-106.
  447. Maffezzoli, A., Kenny, J.M., Nicolais, L. A macrokinetic approach to crystallization modelling of semicrystalline thermoplastic matrices for advanced composites (1993), Journal of Materials Science, 28 (18), pp. 4994-5001.
  448. Maffezzoli, A.M., Peterson, L., Seferis, J.C., Kenny, J., Nicolais, L. Dielectric characterization of water sorption in epoxy resin matrices (1993), Polymer Engineering and Science, 33 (2), pp. 75-82.
  449. Kenny, J.M. Integration of processing models with control and optimization of polymer composites fabrication (1992), pp. 529-544.
  450. Maffezzoli, A., Kenny, J.M., Nicolais, L. Thermal analysis of thermoplastic matrices for advanced composite materials: poly(phenylene sulphide)(1992), Thermochimica Acta, 199 (C), pp. 133-146.
  451. Kenny, J.M., Trivisano, A., Frigione, M.E., Nicolais, L. Thermal analysis of standard and toughened high-performance epoxy matrices (1992), Thermochimica Acta, 199 (C), pp. 213-227.
  452. Trivisano, Antonio, Kenny, Jose M., Nicolais, Luigi, Inserra, Sabato, Voto, Claudio. Control and optimization of autoclave processing of high performance composites (1992), International SAMPE Symposium and Exhibition, 37, pp. 1104-1116.
  453. Griffing, J.S., Seferis, J.C., Kenny, J.M., Nicolais, L. Process-property studies of weld line strength and thin structure flow in high performance injection molded thermoplastics (1991), International SAMPE Technical Conference, 23, pp. 1149-1160.
  454. Berglund, Lars A., Kenny, Jose M. Processing science for high performance thermoset composites (1991), SAMPE Journal, 27 (2), pp. 27-37.
  455. Kenny, Jose M., Trivisano, Antonio, Berglund, Lars A. Chemorheological and dielectric behavior of the epoxy matrix in a carbon fiber prepreg (1991), SAMPE Journal, 27 (2), pp. 39-46.
  456. Torre, L., Kenny, J.M. Characterization of blends of semicrystalline and amorphous matrices for high performance composites (1991), Annual Technical Conference - ANTEC, Conference Proceedings, 37, pp. 2108-2111.
  457. Maffezzoli, A., Kenny, J.M., Nicolais, L. Dynamic mechanical analysis of PPS based composites (1991), Annual Technical Conference - ANTEC, Conference Proceedings, 37, pp. 2079-2083.
  458. Bian, X.S., Ambrosio, L., Kenny, J.M., Nicolais, L., Occhiello, E., Morra, M., Garbassi, F., Dibenedetto, A.T. Effects of surface treatments of fibers on the interfacial properties in single-fiber composites. Part I. Single carbon fiber/epoxy resin composite system (1991,) Journal of Adhesion Science and Technology, 5 (5), pp. 377-388. 1990
  459. Kenny, J.M., Maffezzoli, A., Nicolais, L. A model for the thermal and chemorheological behavior of thermoset processing: (II) Unsaturated polyester based composites (1990), Composites Science and Technology, 38 (4), pp. 339-358.
  460. Trivisano, A., Maffezzoli, A., Kenny, J.M., Nicolais, L. Mathematical modeling of the pultrusion of epoxy-based composites (1990), Advances in Polymer Technology, 10 (4), pp. 251-264.
  461. Kenny, J.M., Trivisano, A., Frigione, M.E., Nicolais, L. Cure kinetics of toughened matrices for high performance composites (1990), Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 63, pp. 790-796.
  462. Saiello, S., Kenny, J., Nicolais, L. Interface morphology of carbon fibre/PEEK composites (1990), Journal of Materials Science, 25 (8), pp. 3493-3496.
  463. Trivisano, A., Maffezzoli, A., Kenny, J.M., Nicolais, L. Modelling of the thermorheological behavior of high performance composites (1990), National SAMPE Symposium and Exhibition (Proceedings), 35 (pt 1), pp. 590-603.
  464. D'Amore, A., Kenny, J.M., Nicolais, L., Tucci, V. Dynamic-mechanical and dielectric characterization of PEEK crystallization (1990), Polymer Engineering and Science, 30 (5), pp. 314-320.
  465. Kenny, J.M., Apicella, A., Nicolais, L. Model for the thermal and chemorheological behavior of thermosets: I Processing of epoxy-based composites (1989), Polymer Engineering and Science, 29 (15), pp. 973-983.
  466. Kenny, J., D'Amore, A., Nicolais, L., Iannone, M., Scatteia, B. Processing of amorphous peek and amorphous peek based composites (1989), SAMPE Journal, 25 (4), pp. 27-34.
  467. Kenny, J.M. USA-Italy Joint Workshop on Composite Materials: Processing Science and Technology of Polymeric Matrix Composites Capri, Italy, 6-10 June 1988 (1989) Composites, 20 (1), pp. 89-90.
  468. Maffezzoli, A.M., Kenny, J.M., Nicolais, L. Welding of peek/carbon fiber composite laminates (1989), SAMPE Journal, 25 (1), pp. 35-39.
  469. Mazzola, M., Apicella, A., Kenny, J.M., Nicolais, L. Control and optimization of the cure process of polyester based composites (1988), Society of the Plastics Industry, Reinforced Plastics/Composites Institute, Annual Conference - Proceedings, pp. 14D.1-14D.7.
  470. D'Amore, A., Kenny, J.M., Nicolais, L. VISCOELASTIC BEHAVIOR OF GLASS REINFORCED FOAMS. (1987), Annual Technical Conference - Society of Plastics Engineers, pp. 457-461.
  471. Apicella, A., Kenny, J., Nicolais, L. PROCESSING OF EPOXY BASED COMPOSITE STRUCTURES. (1987), Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material, 56, p. 434.
  472. Kenny, J., Apicella, A., Nicolais, L. THERMAL AND CHEMORHEOLOGICAL MODELING OF THE PROCESSING OF EPOXY BASED LAMINATES (1986), Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material, 55, p. 901.
  473. Apicella, A., D'Amore, A., Kenny, J., Nicolais, L. TRUE VISCOELASTIC PROPERTIES OF HIGH PERFORMANCE COMPOSITE MATERIALS (1986), Annual Technical Conference - Society of Plastics Engineers, pp. 557-561.
  474. Kenny, J.M., Castro, J.M., Capiati, N.J. ANALYSIS OF THE WALL SLIP EFFECT IN EXTRUSION. LUBRICATED PVC FORMULATIONS (1984), Annual Technical Conference - Society of Plastics Engineers, pp. 69-72.